cancel
Showing results for 
Search instead for 
Did you mean: 

AP7522 RFS4010

AP7522 RFS4010

Andrey
New Contributor

The AP7522 point has a link to the RFS4010 controller over the mint protocol, but the point does not receive settings from the controller.The point and the controller are in the same network. The point was connected to three other controllers and the rf-domain for training. Now I can't return it to the work shop. What is the reason for the failure to get settings from the controller?

17 REPLIES 17

Andrey
New Contributor

EFKO-RFS-1>EFKO-RFS-1>show running-config auto-provisioning-policy lan105
            ^
% Invalid input detected 9999 at '^' marker.

EFKO-RFS-1>auto-provisioning-policy lan105
            ^
% Invalid input detected 9999 at '^' marker.

EFKO-RFS-1> evaluate-always
             ^
% Invalid input detected 9999 at '^' marker.

EFKO-RFS-1> adopt ap7522 precedence 1 profile efko-7522 rf-domain WMS-EFKO-SiM ip 10.2.78.1
            10.2.78.4
             ^
% Invalid input detected 9999 at '^' marker.

EFKO-RFS-1> adopt ap7632 precedence 2 profile efko-AP7632 rf-domain WMS-Zip-TMC ip 10.2.96.
           0/22
             ^
% Invalid input detected 9999 at '^' marker.

EFKO-RFS-1> adopt ap7522 precedence 3 profile yogurt_7522 rf-domain WMS-EFKO-SiM ip 10.2.78
           .6 10.2.78.7
             ^
% Invalid input detected 9999 at '^' marker.

Andrey
New Contributor

Cluster Licenses:
  AP-LICENSE
    Value      : 12
    Used       : 0
  AAP-LICENSE
    Value      : 12
    Used       : 12

Cluster MAX AP Capacity:
  Value        : 24
  Used         : 12

Andrey
New Contributor

EFKO-RFS-1>show running-config auto-provisioning-policy lan105
auto-provisioning-policy lan105
 evaluate-always
 adopt ap7522 precedence 1 profile efko-7522 rf-domain WMS-EFKO-SiM ip 10.2.78.1                       10.2.78.4
 adopt ap7632 precedence 2 profile efko-AP7632 rf-domain WMS-Zip-TMC ip 10.2.96.                      0/22
 adopt ap7522 precedence 3 profile yogurt_7522 rf-domain WMS-EFKO-SiM ip 10.2.78                      .6 10.2.78.7
-----------------------------

EFKO-RFS-1>EFKO-RFS-1>show adoption pending
-----------------------------------------------------------------------------------------------------------------------------------------------------------
                MAC       TYPE        IP-ADDRESS/VLAN                      REASON       DISCOVERY-OPTION   LAST-SEEN                       CONNECTED-TO
-----------------------------------------------------------------------------------------------------------------------------------------------------------
-----------------------------------------------------------------------------------------------------------------------------------------------------------
Total number of devices displayed: 0
 

Christoph_S
Extreme Employee

In addition to above, do you have enough licenses? #show lic

Christoph S.

ckelly
Extreme Employee

Andrey,

Do you have an auto-provisioning policy created with a rule for the AP...and the auto-provisioning policy applied to the RFS4010?

 

run:

show running-config auto-provisioning-policy <insert auto-provisioning policy name>

 

Also run:

show adoption pending

GTM-P2G8KFN