AP8432 Radios off (no country code)

[MichaelM5]

I recently had to request a replacement AP8432. The one that came doesn't broadcast any SSIDs. It was adopted just fine by the others and I can see it in the Extreme WiNG Manager. But it says the radios are both off because they have no country code.

I have checked and the country code is set for the RF Domain. I am only able to check in the VC because the AP actively refuses to let me connect it through the Manager.

I am able to Telnet to it, but I cannot find a place where I can set the country through Telnet. I am able to see that the radios are off because it doesn't appear to have one set.

I have checked the RF Domain:
On the configuration page.

I have checked the RF Domain in the Device's Overrides:
They both clearly show the country code setup.

I have tried changing it to something else, Commit and Save, and then changing it back to see if that would make any difference. It didn't.

How do I get this AP8432 to turn on its radios and broadcast the SSIDs?

EDIT to add version:
Here is the output from the "Show Version" command:
Here's a picture of the back of the AP (had to put my thumb there because my phone kept trying to read the QR code instead of taking a picture):

[Christoph_S]

Hello Michael,

Here's a list of possible reasons your AP is not broadcasting the SSID (radios off): https://extremeportal.force.com/ExtrArticleDetail?an=000088793

In your case, please SSH into the AP and provide us with full AP model by running this command:
#show version
Also check the label on back of AP to see if the model numbers match (meaning in config and on label)​.

Thank you,