Motorola G3/4 mobile phones will not authenticate with wlan, Dot11i timeout. If I set the wifi to be Open its fine, but will not connect using wpa-ccmp or wpa2-ccmp. I have changed the timeouts to the following (config-wlan-test)#wpa-wpa2 handshake ...
I am trying to set the radio transmission power level over SNMP. I have an OID from the MIB that says I should be able to do this, but I cannot find a value that will be acceptable. The OID 1.3.6.1.4.1.388.50.1.3.16.2.6.1.3 - wingCfgProfIfRadio...
I have a user who needs to see if there are any faults on the access point radios over SNMPv3. I have looked through the MIB OIDs, but I cannot find any sort of fault status provided for the radios of the access point. The only thing I can find is ...
Do you have to use all of the AP7161's radio antenna connectors? Are the radios configurable for 2x2 or 3x3 in the GUI or CLI or is it just a matter of not using certain antenna connectors on the AP?
Hi, we are setting up test environment for 802.1x for wireless users using NAC and WiNG wireless solution before implementing to production. we have 4 groups: Corporate Consultants Guest BYOD we only used 1 SSID and dynamically assigned the VLAN...
