continuos boot AP8533

[Ismael1]

Hi Experts, this is a log of an AP8533 via console port, is not possible to login because the boot process is continuosly starting.
Coul you please help me? I have 6 AP same problem.

Thank you!



*** Panic dump detected; saving panic dump to flash:/crashinfo/panic_201811070510_AP8533_5.8.6.0-011R.tar.gz ***
/etc/rcS.d/S05_handle_panic_records: line 35: can't create /flash/crashinfo/panic_201811070510_AP8533_5.8.6.0-011R.tar.gz: No space left on device
Unable to handle kernel NULL pointer dereference at virtual address 00000010
pgd = dbdec000
[00000010] *pgd=bdce3031, *pte=00000000, *ppte=00000000
Internal error: Oops: 17 [#1] SMP
last sysfs file: /sys/devices/virtual/mtd/mtd11/flags
Modules linked in: wl_apsta(P+) ipi_hsl(P) dataplane(P) hci_uart bluetooth iproc_rng xt_connlimit xt_tcpudp xt_mark iptable_nat nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_conntrack iptable_filter ip_tables x_tables panic_dump
CPU: 1 Tainted: P (2.6.35.9-ws-symbol #1)
PC is at wl_free+0x178/0x1ec [wl_apsta]
LR is at wl_free+0x168/0x1ec [wl_apsta]
pc : [] lr : [] psr: 60000013
sp : dd1b7d50 ip : 07dfc000 fp : 00000001
r10: dcc34c00 r9 : 40800000 r8 : ddd0ec00
r7 : 00000001 r6 : 00000000 r5 : db23ae80 r4 : dcc6a000
r3 : 00000000 r2 : db239720 r1 : 00000010 r0 : c040a2a4
Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user
Control: 10c53c7d Table: bcdec04a DAC: 00000015
Process insmod (pid: 316, stack limit = 0xdd1b6270)
Stack: (0xdd1b7d50 to 0xdd1b8000)
7d40: 40800000 dcc34c00 00000001 c030581c
7d60: dcc6a400 dd1b7d74 00000001 bf67b520 00000000 dcc6a400 db23ae80 bf67b780
7d80: 00000000 db23ae80 deff0000 00000001 ddd0ec00 00000000 dd1b7dc0 db23ae4c
7da0: 00800000 c0420440 ff800000 c00be4bc 007fffff bf8cee00 000043c5 000014e4
7dc0: 0000000e e2200000 db237000 c000788c e23fffff c00a694c 00000000 c00b4afc
7de0: 00000000 40200000 e2400000 c0053ff4 bf67db5c 40400000 e2400000 e23fffff
7e00: c040c858 e2400000 c0007890 40400000 e2400000 e23fffff 00000000 00040000
7e20: 00000000 00400000 e2000000 c040c858 dd1b6000 00000000 00000000 c0054108
7e40: 00000000 00000000 00400000 ddd0ec00 00400000 00400000 e1800000 dd178d80
7e60: dd1b6000 00000000 00000000 bf67db94 000000a9 e1800000 00400000 e2000000
7e80: 00400000 c0172d94 bf67da80 ddd0ec60 bf8cc5a0 ddd0ec00 bf8cc570 c018c428
7ea0: c018c3c8 c045d714 ddd0ec60 ddd0ec94 bf8cc5a0 c01a99b8 00000000 ddd0ec60
7ec0: bf8cc5a0 ddd0ec94 c041296c c01a9b50 00000000 bf8cc5a0 c01a9ac4 c01a8a5c
7ee0: ddc728bc ddce5394 bf8cc5a0 bf8cc9dc c041296c c01a9440 bf82c530 db248000
7f00: bf8cc5a0 bf8cc5a0 bf8cc9dc bf8cc5a0 c041296c c0422000 dd1b6000 c01a9d08
7f20: bf8cc5d8 bf8cc570 bf8cc9dc bf8cc5a0 c041296c c0422000 dd1b6000 c018c5ec
7f40: 00000000 bf8cc9dc 00000000 bf90e000 c0422000 c004a614 00000000 00000000
7f60: ddcde000 00000000 bf8cc9dc 00000000 bf8cc9dc 00086008 0059c9e0 c004b224
7f80: 00000003 c0091748 00000003 ddc138c0 ddc13900 00000000 00000000 0059c9e0
7fa0: 00000080 c004b0a0 00000000 00000000 401ca008 0059c9e0 00086008 00000003
7fc0: 00000000 00000000 0059c9e0 00000080 00178bd8 00000000 00000003 00000000
7fe0: be17aaf8 be17aae8 000157f4 4011b270 60000010 401ca008 e155000a 0a00002c
[] (wl_free+0x178/0x1ec [wl_apsta]) from [] (wl_attach.isra.6.constprop.7+0x4ac/0x534 [wl_apsta])
unwind: Index not found bf67b780
Code: e3a03000 e584327c e5943004 e3a01010 (e5930010)
---[ end trace 6865b4bfd205c2be ]---
Kernel panic - not syncing: Fatal exception
[] (unwind_backtrace+0x0/0xf8) from [] (panic+0x54/0xe0)
[] (panic+0x54/0xe0) from [] (die+0x198/0x1c8)
[] (die+0x198/0x1c8) from [] (__do_kernel_fault.part.3+0x54/0x74)
[] (__do_kernel_fault.part.3+0x54/0x74) from [] (do_page_fault+0x2dc/0x310)
[] (do_page_fault+0x2dc/0x310) from [] (do_DataAbort+0x34/0x98)
[] (do_DataAbort+0x34/0x98) from [] (__dabt_svc+0x4c/0x60)
Exception stack(0xdd1b7d08 to 0xdd1b7d50)
7d00: c040a2a4 00000010 db239720 00000000 dcc6a000 db23ae80
7d20: 00000000 00000001 ddd0ec00 40800000 dcc34c00 00000001 07dfc000 dd1b7d50
7d40: bf5a1810 bf5a1820 60000013 ffffffff
[] (__dabt_svc+0x4c/0x60) from [] (wl_free+0x178/0x1ec [wl_apsta])
[] (wl_free+0x178/0x1ec [wl_apsta]) from [] (wl_attach.isra.6.constprop.7+0x4ac/0x534 [wl_apsta])
unwind: Index not found bf67b780
CPU0: stopping
dumping panic record into NAND pages 121408-131071
timed out waiting for controller to be ready
timed out waiting for controller to be ready
timed out waiting for controller to be ready
timed out waiting for controller to be ready
timed out waiting for controller to be ready
[] (unwind_backtrace+0x0/0xf8) from [] (do_IPI+0xec/0x15c)
[] (do_IPI+0xec/0x15c) from [] (__irq_svc+0x34/0xe0)
Exception stack(0xc0401f70 to 0xc0401fb8)
1f60: 05f7486d 0000002b c0401fb8 00000000
1f80: c0400000 c0400000 c0422264 c040c0c4 a1000000 413fc090 0000001f 00000000
1fa0: 00000000 c0401fb8 c004bb68 c004bb6c 60000013 ffffffff
[] (__irq_svc+0x34/0xe0) from [] (default_idle+0x24/0x28)
[] (default_idle+0x24/0x28) from [] (cpu_idle+0x58/0x94)
[] (cpu_idle+0x58/0x94) from [] (start_kernel+0x254/0x2a4)
[] (start_kernel+0x254/0x2a4) from [] (0xa1008084)
Rebooting in 1 seconds..¦
read config...............w1i2c1
write config..............w1i2c0
booting image2 @ address 0x1c140000

U-Boot 5.8.6.0-011R (Feb 23 2017 - 23:27:02)

I2C: ready
DEV ID = 0xcf1e
PCIE CFG DEV ID = 0x8025
OTP offset(0x8): 0x78f01c01
OTP offset(0x9): 0xfe200818
OTP offset(0xa): 0xc01b0
OTP offset(0xb): 0x0
OTP offset(0xc): 0x4a00000
OTP offset(0xd): 0xffede230
OTP offset(0xe): 0x1035d17f
OTP offset(0xf): 0x3406
NSP25 32bit DDR
SKU ID = 0x0
DDR type: DDR3
MEMC 0 DDR speed = 800MHz
ddr_init2: Calling soc_ddr40_set_shmoo_dram_config
ddr_init2: Calling soc_ddr40_phy_calibrate
C01. Check Power Up Reset_Bar
C02. Config and Release PLL from reset
C03. Poll PLL Lock
C04. Calibrate ZQ (ddr40_phy_calib_zq)
C05. DDR PHY VTT On (Virtual VTT setup) DISABLE all Virtual VTT
C06. DDR40_PHY_DDR3_MISC
C07. VDL Calibration
C07.1
C07.2
C07.4
C07.4.1
C07.4.4
VDL calibration result: 0x30000003 (cal_steps = 0)
C07.4.5
C07.4.6
C07.5
C08. DDR40_PHY_DDR3_MISC : Start DDR40_PHY_RDLY_ODT....
C09. Start ddr40_phy_autoidle_on (MEM_SYS_PARAM_PHY_AUTO_IDLE) ....
C10. Wait for Phy Ready
Programming controller register
ddr_init2: Calling soc_ddr40_shmoo_ctl
memory test OK
DDR Tune Completed
DRAM: 512 MiB
NAND: cs 0 dev_id word 0 2cdc90a6
Micron MT29F4G08ABAEA,
ONFI info: device 512MB, page 4096B, oobsize 224B, block 256KB,
col-addr 2, row-addr 3, 8-bit
Found strap type 0x4 strap page 0x2
REG_ACC_CONTROL c108001c spare_area_bytes 1c ecc_level 8 eccbytes e steps 8
REG_CONFIG 37252300
256 KiB blocks, 4 KiB pages, 28B OOB, 8-bit
NAND: user oob per page: 110 bytes (8 steps)
NAND: device size 512 MiB
Card detected in PCIe port 0
Card detected in PCIe port 1
Card detected in PCIe port 2
In: serial
Out: serial
Err: serial
Net: Registering eth
Broadcom BCM IPROC Ethernet driver 0.1
Using GMAC1 (0x18023000)
et0: ethHw_chipAttach: Chip ID: 0xcf1e; phyaddr: 0x1e
bcm_robo_attach: devid: 0xd (cedar3)
bcmiproc_eth-0
Loading runtime image 2. Press ESC to abort. 0
boot config w1i2c0 -booting linux2/rootfs2
## Booting kernel from Legacy Image at a1007fc0 ...
Image Name: Linux-2.6.35.9-ws-symbol
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 4298944 Bytes = 4.1 MiB
Load Address: a1008000
Entry Point: a1008000
Verifying Checksum ... OK
XIP Kernel Image ... OK
OK

Starting kernel ...

pflash: found no supported devices
Welcome.

[RobertZ]

How To: Return Material Authorization RMA Process and FAQ

[Alona]

This AP is defective - you need to RMA and replace it.

[Ronald_Dvorak]

What's the backstory.... did they work before, what have you done, are they brand new ?!

[Ismael1]

Hi, thank you for your time.
Its the AP8533 was working correctly i don´t have more information from the costumer.
The manufactory date is 13 Jan 17.

I know is possible to access into a hide menu pressing ESC when the CLI boot starts, do ypu known somethin about it?