I have antena Omi 2.4 14dbi. I plugged in R1-A port, the AP signal good.
But i plugged in to R2-B and R2-C, the AP do not signal wifi.
The same situation occurs with 5ghz band.
Have you configured the AP radio setting's Antenna Mode for 1x1 operation or enabled the Dynamic Chain selection options in the AP's radio interfaces?
Do you have more than one antenna you can connect at a time to test?
Have you configured the AP radio setting's Antenna Mode for 1x1 operation or enabled the Dynamic Chain selection options in the AP's radio interfaces?
Do you have more than one antenna you can connect at a time to test?