Do not receive the antenna on AP7562

[Tuan_Nguyen1]

Hi you

I have antena Omi 2.4 14dbi. I plugged in R1-A port, the AP signal good.
But i plugged in to R2-B and R2-C, the AP do not signal wifi.
The same situation occurs with 5ghz band.

Is there any problem with my AP configuration?

[Tuan_Nguyen1]

Hi @Chris Kelly

This is my configuration. How do I configure it correctly? I will use 1 anten Omni and 2 anten sector for band 2.4Ghz.

Thank you

[ckelly · Accepted solution]

Have you configured the AP radio setting's Antenna Mode for 1x1 operation or enabled the Dynamic Chain selection options in the AP's radio interfaces?
Do you have more than one antenna you can connect at a time to test?

Where are you reading those signal levels?

[Tuan_Nguyen1]

When i plugged in to R1-A signal is -40dBm.
I plugged in to R1-B and R1-C signal is -82dBm

[ckelly]

When you say that the "AP do not signal wifi" when the antenna is plugged into R1-B and R1-C, what are you seeing that tells you it isn't working?

[Tuan_Nguyen1]

Hi @Chris Kelly

Sorry for mistake.

I have antena Omi 2.4 14dbi. I plugged in R1-A port, the AP signal good.
But i plugged in to R1-B and R1-C, the AP do not signal wifi.