Extreme Networks

jflores · ‎07-18-2020

I have an AP510i in standalone mode but I can't see the web interface to configure it.
This is the IP that I am connecting to according to the manual.

79e914df12f345759f19dded65af812e_d4d26fd2-4dfc-44bb-a28d-9a4cca018b89.png

I already have connectivity between the laptop and the AP.

79e914df12f345759f19dded65af812e_1c9ee087-bda5-4aa1-bff7-c372ae16e038.png

But when I try to infest from any browser, it throws the following error.

79e914df12f345759f19dded65af812e_610af337-3e8a-4e4a-93c6-5724aeb8b049.png

Does anyone know if I have to enable a service in order to manage the web interface.

Christoph_S · ‎07-20-2020

Hello Jesus,

As Mig said, you probably have a LEAN image on your AP. You cannot differentiate between the 2 once installed. I would recommend you upgrade to the latest 7.3.1.4 firmware and not reinstall the same version. Make sure you select the full and not the LEAN version.

Regards,

Chris

Christoph S.

View solution in original post

jflores · ‎07-18-2020

Thank you very much Miguel, my question is going to sound very silly but how can I differentiate between the LEAN version and the STANDARD version. This is the version that my AP has.

6c596d031bf747148c8aedcfbded79ea_eb610633-922e-4f82-9bfe-d272d43ef8e0.png

Again, thank you very much.

Miguel-Angel_RO · ‎07-18-2020

Jesus,

This is certainly due to the fact that the AP has been preloaded with the LEAN firmware.

You must upgrade it with the full image to have a web UI interface.

Mig

Extreme Networks

I can't see the web interface of an AP510i in standalone mode

I can't see the web interface of an AP510i in standalone mode