Not mesh connection Mesh between AP 8432 and AP7632

[Alan_Phan]

Dear Team,

Please help me resolve this issue:
I try to setup Mesh between two APs. One is connected with Ethernet (AP 8432)and one not(AP 7632).
. Would you please give me some idea can fix it.

many thanks,
Alan

[Alan_Phan]

Hello Chris,

Thanks for your information. In this case, I can set AP8432 do controller and mesh connection with AP7632 or not?

Regards,
Alan

[Christoph_S]

Hello Alan,

I've attached the meshconnex setup instructions. If testing in lab/office make sure you follow these guidelines:

1 - The APs both be running on the latest recommended firmware. In your case this would be 5.9.2.6
2 - Make sure that the APs are a few feet apart
3 - Reduce the radio power to 1. Once tests done and connection established, reconfigure the power to whatever you need it to be prior to deployment

I hope this helps,

Thank you,

Chris