cancel
Showing results for 
Search instead for 
Did you mean: 

RFS6000 ---- CPU load averages : 1 min: 99.9% 5 min: 99.9% 15 min: 99.9%

RFS6000 ---- CPU load averages : 1 min: 99.9% 5 min: 99.9% 15 min: 99.9%

YAZID
New Contributor II
Hello,
We have a RFS6000 WIFI controller and currently I have 100% processor load.
- service show diag stats :
CPU load averages : 1 min: 99.9% 5 min: 99.9% 15 min: 99.9%
Processor use by processes seems correct.
- service show diag top
PID STATUS RSS PPID %CPU %MEM COMMAND
1206 S 29M 1205 0.0 11.9 ccsrvr
1330 S 22M 1329 0.0 8.8 securitymgr
1227 S 10M 1226 0.0 4.3 ccstatsd
1391 S 7280 1390 0.0 2.8 rnsd
1172 S 6768 1171 0.5 2.6 snmpd
1368 S 5944 1365 0.0 2.3 dpd
1423 S 4632 1 0.0 1.8 imi
18406 S 4360 18404 0.0 1.7 imish
1235 S 3764 1234 0.0 1.4 fileMgmt
1187 S 3592 1186 0.0 1.4 CertMgr

I do not understand the cause of this processor overhead !!!
Someone can help me
Thank you

8 REPLIES 8

Bin
Extreme Employee
Hi,

How To Create a Case Through Extreme Support Portal

https://gtacknowledge.extremenetworks.com/articles/How_To/Create-a-Case-via-New-Portal

RobertZ
Extreme Employee
Yazid please contact GTAC on the phone or you can use the Extreme Portal to open a case.

RobertZ
Extreme Employee
You are running firmware WiNG 4.x the above kb article does not apply. KB states that in firmware WiNG 5.5 CDP is enabled by default, while in earlier versions CDP was disabled by default.

YAZID
New Contributor II
Hello Christoph S;
Below the result of the "show version"
RFS6000 version 4.4.1.0-008R MIB=01a
Copyright (c) 2006-2011 Motorola Solutions, Inc.
Booted from secondary.

switch uptime is 540 days, 9 hours 39 minutes
CPU is RMI XLR V0.4
255476 kB of on-board RAM
Cordially;
GTM-P2G8KFN