- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Get Direct Link
- Report Inappropriate Content
‎01-08-2025 10:24 PM
Hello, I have a nx5500 controller and 28 AP-310 Wi-Fi points. 24 Wi-Fi points are connected to the controller, and the other 4 are connected to one Wi-Fi point. Can you tell me what could be the reason? Thank you
Solved! Go to Solution.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Get Direct Link
- Report Inappropriate Content
‎01-09-2025 05:35 AM
Hello @kocmoc,
That AP that the 4 are connected to is probably configured as a virtual controller. If this is the case then disable VC on that AP and if configured properly, the APs will revert to the controller.
Instructions for your perusal: https://extreme-networks.my.site.com/ExtrArticleDetail?an=000081758
Refer to section B2.
BR,
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Get Direct Link
- Report Inappropriate Content
‎01-09-2025 05:35 AM
Hello @kocmoc,
That AP that the 4 are connected to is probably configured as a virtual controller. If this is the case then disable VC on that AP and if configured properly, the APs will revert to the controller.
Instructions for your perusal: https://extreme-networks.my.site.com/ExtrArticleDetail?an=000081758
Refer to section B2.
BR,
