This website uses cookies. By clicking Accept, you consent to the use of cookies. Click Here to learn more about how we use cookies.
Accept
Reject
Help
cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Search instead for 
Did you mean: 

Upgrading remote site APS through RFDM AP

Upgrading remote site APS through RFDM AP

Go to solution
Aviv_Kedem
Contributor

‎10-22-2019 11:26 AM

Hello guys,

In my lab I can’t make working the upgrading remote site APS through RFDM AP.

My upgrades are successful, but through VX9000 and not through the RFDM AP.

The test is very simple, VX9000 + 2 pieces of AP7532 in the same vlan.

VX running config:

!### show running-config
!
! Configuration of VX9000 version 7.2.1.1-006R
!
!
version 2.7
!
!
client-identity-group default
 load default-fingerprints
!
ip access-list BROADCAST-MULTICAST-CONTROL
 permit tcp any any rule-precedence 10 rule-description "permit all TCP traffic"
 permit udp any eq 67 any eq dhcpc rule-precedence 11 rule-description "permit DHCP replies"
 deny udp any range 137 138 any range 137 138 rule-precedence 20 rule-description "deny windows netbios"
 deny ip any 224.0.0.0/4 rule-precedence 21 rule-description "deny IP multicast"
 deny ip any host 255.255.255.255 rule-precedence 22 rule-description "deny IP local broadcast"
 permit ip any any rule-precedence 100 rule-description "permit all IP traffic"
!
mac access-list PERMIT-ARP-AND-IPv4
 permit any any type ip rule-precedence 10 rule-description "permit all IPv4 traffic"
 permit any any type arp rule-precedence 20 rule-description "permit all ARP traffic"
!
ip snmp-access-list default
 permit any
!
firewall-policy default
 no ip dos tcp-sequence-past-window
!
!
mint-policy global-default
!
meshpoint-qos-policy default
!
wlan-qos-policy default
 qos trust dscp
 qos trust wmm
!
radio-qos-policy default
!
!
management-policy default
 no telnet
 no http server
 https server
 rest-server
 ssh
 user admin password 1 b3c4e90173bd1f030e821f04ee833f17e78b4133788ffb40f12928bfabba10c8 role superuser access all
 snmp-server community 0 private rw
 snmp-server community 0 public ro
 snmp-server user snmptrap v3 encrypted des auth md5 0 admin123
 snmp-server user snmpmanager v3 encrypted des auth md5 0 admin123
 t5 snmp-server community public ro 192.168.0.1
 t5 snmp-server community private rw 192.168.0.1
!
ex3500-management-policy default
 snmp-server community public ro
 snmp-server community private rw
 snmp-server notify-filter 1 remote 127.0.0.1
 snmp-server view defaultview 1 included
!
ex3500-qos-class-map-policy default
!
ex3500-qos-policy-map default
!
database-policy default
!
profile vx9000 default-vx9000
 no autoinstall configuration
 no autoinstall firmware
 no device-upgrade auto
 crypto ikev1 policy ikev1-default 
  isakmp-proposal default encryption aes-256 group 2 hash sha 
 crypto ikev2 policy ikev2-default 
  isakmp-proposal default encryption aes-256 group 2 hash sha 
 crypto ipsec transform-set default esp-aes-256 esp-sha-hmac
 crypto ikev1 remote-vpn
 crypto ikev2 remote-vpn
 crypto auto-ipsec-secure
 crypto load-management
 crypto remote-vpn-client
 interface xge1
 interface xge2
 interface xge3
 interface xge4
 interface ge1
 interface ge2
 use firewall-policy default
 logging on
 service pm sys-restart
 router bgp
 adoption-mode controller
!
profile ap7532 default-ap7532
 autoinstall configuration
 autoinstall firmware
 crypto ikev1 policy ikev1-default 
  isakmp-proposal default encryption aes-256 group 2 hash sha 
 crypto ikev2 policy ikev2-default 
  isakmp-proposal default encryption aes-256 group 2 hash sha 
 crypto ipsec transform-set default esp-aes-256 esp-sha-hmac
 crypto ikev1 remote-vpn
 crypto ikev2 remote-vpn
 crypto auto-ipsec-secure
 crypto load-management
 crypto remote-vpn-client
 interface radio1
 interface radio2
 interface ge1
 interface vlan1
  ip address dhcp
  ip address zeroconf secondary
  ip dhcp client request options all
 interface pppoe1
 use firewall-policy default
 use client-identity-group default
 logging on
 controller host 172.17.8.3 pool 1 level 2
 service pm sys-restart
 router ospf
 adoption-mode controller
!
rf-domain VXtest
 country-code il
!
rf-domain default
 no country-code
 control-vlan 1
!
vx9000 08-00-27-1D-96-AB
 use profile default-vx9000
 use rf-domain VXtest
 hostname vx9000-1D96AB
 license AAP VX-DEMO-16AAP-LICENSE
 license ADSEC DEFAULT-ADV-SEC-LICENSE
 no mint mlcp vlan
 autoinstall firmware
 interface ge1
 interface ge2
 interface vlan1
  ip address dhcp
!
ap7532 B8-50-01-71-C0-D4
 use profile default-ap7532
 use rf-domain default
 hostname ap7532-71C0D4
!
ap7532 B8-50-01-74-3E-6C
 use profile default-ap7532
 use rf-domain default
 hostname ap7532-743E6C
!
!
end

Info from VX:

vx9000-1D96AB#show mint ne
1 mint neighbors of 12.1D.96.AB:
1B.71.C0.D4 (ap7532-71C0D4) at level 2, best adjacency ip-172.17.8.4:24576

vx9000-1D96AB#show global domain managers 
-----------------------------------------------------------------------------------------------------
                      RF-DOMAIN                              MANAGER          HOST-NAME  APS  CLIENTS
-----------------------------------------------------------------------------------------------------
                         VXtest                    08-00-27-1D-96-AB      vx9000-1D96AB    0        0
                        default                    B8-50-01-71-C0-D4      ap7532-71C0D4    2        0
-----------------------------------------------------------------------------------------------------
Total number of RF-domain displayed: 2

vx9000-1D96AB#show device-upgrade history 
-------------------------------------------------------------------------------------------------
            Device      RESULT                 TIME  RETRIES        UPGRADED-BY LAST-UPDATE-ERROR
-------------------------------------------------------------------------------------------------

     ap7532-743E6C        done  2019-10-22 09:23:31        0      vx9000-1D96AB -

     ap7532-71C0D4        done  2019-10-22 09:24:42        0      vx9000-1D96AB -

Total number of entries displayed: 2

vx9000-1D96AB#show mint neighbors on ap7532-71C0D4
2 mint neighbors of 1B.71.C0.D4:
1B.74.3E.6C (ap7532-743E6C) at level 1, best adjacency vlan-1
12.1D.96.AB (vx9000-1D96AB) at level 2, best adjacency ip-172.17.8.3:24576

vx9000-1D96AB#show mint neighbors on ap7532-743E6C
1 mint neighbors of 1B.74.3E.6C:
1B.71.C0.D4 (ap7532-71C0D4) at level 1, best adjacency vlan-1

vx9000-1D96AB#show mint links 
1 mint links on 12.1D.96.AB:
link ip-172.17.8.4:24576 at level 2, 1 adjacencies, (used)

What is wrong with my configuration?

Why I can’t make the upgrades working through RFDM AP?

 

Thanks,

 

Aviv

0 Kudos
1 ACCEPTED SOLUTION

Go to solution
ckelly
Extreme Employee

‎10-23-2019 06:53 PM

I can certainly testify that this works perfectly in WiNG-5.  (Can’t imagine how it would’ve gotten messed up in WiNG-7 though).  This topology is used for a HUGE number of deployments.  If something was fundamentally broken in this regard, we’d have heard about it long before now.

 

From the controller, my output looks like this:

NX(config)#sh device-upgrade history on LAB
-------------------------------------------------------------------------------------------------
            Device      RESULT                 TIME  RETRIES        UPGRADED-BY LAST-UPDATE-ERROR
-------------------------------------------------------------------------------------------------

   LAB-MCX            done  2019-03-13 13:15:37        0       8533-Floor-1      -

   8533-Floor-2      done  2019-03-13 13:14:39        0       8533-Floor-1      -

   8533-Floor-2      done  2018-11-09 12:39:30        0       8533-Floor-1      -
Total number of entries displayed: 3

 

 

On the RFDM AP, the output shows this (the non-RFDM AP output is empty)

(You can see in the first column (Device) the listing of non-RFDM APs that this RFDM AP had upgraded.

8533-Floor-1#sh device-upgrade history
-------------------------------------------------------------------------------------------------
            Device      RESULT                 TIME  RETRIES        UPGRADED-BY LAST-UPDATE-ERROR
-------------------------------------------------------------------------------------------------

  8533-Floor-2       done  2019-03-13 13:14:39        0       8533-Floor-1      -

  LAB-MCX             done  2019-03-13 13:15:37        0       8533-Floor-1      -

  8533-Floor-2       done  2018-11-09 12:39:30        0       8533-Floor-1      -
Total number of entries displayed: 3

 

View solution in original post

0 Kudos
20 REPLIES 20

Go to solution
Aviv_Kedem
Contributor

‎10-23-2019 02:25 PM

Hello guys,

Logs from VX when device-upgrade rf-domain default all force executed :

vx9000-1D96AB#device-upgrade all force 
In progress ....
--------------------------------------------------------------------------------
       CONTROLLER         STATUS                     MESSAGE                    
--------------------------------------------------------------------------------
  08-00-27-1D-96-AB     Success     Number of devices added for upgrade: 2      
--------------------------------------------------------------------------------
Are you sure you want to proceed with the upgrade? (y/n): y
--------------------------------------------------------------------------------
           CONTROLLER                              MESSAGE                      
--------------------------------------------------------------------------------
  08-00-27-1D-96-AB             Successfully started device upgrade             
--------------------------------------------------------------------------------
vx9000-1D96AB#show device-upgrade status 
Number of devices currently being upgraded : 2
Number of devices waiting in queue to be upgraded : 0
Number of devices currently being rebooted : 0
Number of devices waiting in queue to be rebooted : 0
Number of devices failed upgrade : 0
--------------------------------------------------------------------------------------------------------------
      DEVICE         STATE     UPGRADE TIME REBOOT TIME PROGRESS RETRIES LAST UPDATE ERROR    UPGRADED BY     
--------------------------------------------------------------------------------------------------------------
  ap7532-71C0D4   downloading   immediate    immediate   8        0       -                 vx9000-1D96AB     
  ap7532-743E6C   downloading   immediate    immediate   8        0       -                 vx9000-1D96AB     
--------------------------------------------------------------------------------------------------------------
vx9000-1D96AB#show gl domain managers 
-----------------------------------------------------------------------------------------------------
                      RF-DOMAIN                              MANAGER          HOST-NAME  APS  CLIENTS
-----------------------------------------------------------------------------------------------------
                         VXtest                    08-00-27-1D-96-AB      vx9000-1D96AB    0        0
                        default                    B8-50-01-71-C0-D4      ap7532-71C0D4    2        0
-----------------------------------------------------------------------------------------------------
Total number of RF-domain displayed: 2
vx9000-1D96AB#show device-upgrade status 
Number of devices currently being upgraded : 2
Number of devices waiting in queue to be upgraded : 0
Number of devices currently being rebooted : 0
Number of devices waiting in queue to be rebooted : 0
Number of devices failed upgrade : 0
--------------------------------------------------------------------------------------------------------------
      DEVICE         STATE     UPGRADE TIME REBOOT TIME PROGRESS RETRIES LAST UPDATE ERROR    UPGRADED BY     
--------------------------------------------------------------------------------------------------------------
  ap7532-71C0D4   downloading   immediate    immediate   49       0       -                 vx9000-1D96AB     
  ap7532-743E6C   downloading   immediate    immediate   49       0       -                 vx9000-1D96AB     
--------------------------------------------------------------------------------------------------------------
vx9000-1D96AB#

logs from ap7532-71C0D4

2019-10-23 11:16:26     ap7532-71C0D4  SYSTEM     CONFIG_REVISION      Configuration revision updated to 4 from 3
2019-10-23 11:14:25     ap7532-71C0D4  SYSTEM     WARM_START_RECOVER   Warm Start Recover. Reason: Upgrade done, reloading... (user: system @ vx9000-1D96AB) Timestamp: Oct 23 11:11:57 2019
2019-10-23 11:14:23     ap7532-71C0D4  SYSTEM     CONFIG_REVISION      Configuration revision updated to 3 from 3
2019-10-23 11:14:23     ap7532-71C0D4  SYSTEM     CONFIG_COMMIT        Configuration commit by user 'cfgd' (update own config) from '127.0.0.1'
2019-10-23 11:14:27     ap7532-71C0D4  SYSTEM     CLOCK_RESET          System clock reset, Time: 2019-10-23 11:14:23
2019-10-23 11:14:26     ap7532-71C0D4  DEVICE     ADOPTED_TO_CONTROLLER Joined successfully with controller 'vx9000-1D96AB'(12.1D.96.AB)
2019-10-23 11:14:26     ap7532-71C0D4  DIAG       NEW_LED_STATE        LED state message adopted-event from module cfgd
2019-10-23 11:13:55     ap7532-71C0D4  NSM        DHCPIP               Interface vlan1 acquired IP address 172.17.8.4/24 via DHCP
2019-10-23 11:13:55     ap7532-71C0D4  NSM        DHCPDEFRT            Default route with gateway 172.17.8.254 learnt via DHCP
2019-10-23 11:12:54     ap7532-71C0D4  DIAG       NEW_LED_STATE        LED state message WIOS_LED_NO_COUNTRY_1_52G from module DOT11
2019-10-23 11:12:54     ap7532-71C0D4  RADIO      RADIO_STATE_CHANGE   Radio 'ap7532-71C0D4:R2' changing state from 'Initializing' to 'Off(no country-code)' 
2019-10-23 11:12:54     ap7532-71C0D4  DIAG       NEW_LED_STATE        LED state message WIOS_LED_NO_COUNTRY_1_52G from module DOT11
2019-10-23 11:12:54     ap7532-71C0D4  RADIO      RADIO_STATE_CHANGE   Radio 'ap7532-71C0D4:R2' changing state from 'Off' to 'Initializing' 
2019-10-23 11:12:53     ap7532-71C0D4  DIAG       NEW_LED_STATE        LED state message WIOS_LED_NO_COUNTRY_0_24G from module DOT11
2019-10-23 11:12:53     ap7532-71C0D4  DIAG       NEW_LED_STATE        LED state message WIOS_LED_NO_COUNTRY_0_24G from module DOT11
2019-10-23 11:12:53     ap7532-71C0D4  DIAG       NEW_LED_STATE        LED state message WIOS_LED_NO_COUNTRY_1_52G from module DOT11
2019-10-23 11:12:53     ap7532-71C0D4  RADIO      RADIO_STATE_CHANGE   Radio 'ap7532-71C0D4:R1' changing state from 'Initializing' to 'Off(no country-code)' 
2019-10-23 11:12:53     ap7532-71C0D4  DIAG       NEW_LED_STATE        LED state message WIOS_LED_NO_COUNTRY_1_52G from module DOT11
2019-10-23 11:12:53     ap7532-71C0D4  RADIO      RADIO_STATE_CHANGE   Radio 'ap7532-71C0D4:R1' changing state from 'Off' to 'Initializing' 
2019-10-23 11:12:53     ap7532-71C0D4  RADIO      RADIO_STATE_CHANGE   Radio 'ap7532-71C0D4:R2' changing state from 'Initializing' to 'Off(no country-code)' 
2019-10-23 11:12:53     ap7532-71C0D4  RADIO      RADIO_STATE_CHANGE   Radio 'ap7532-71C0D4:R2' changing state from 'Unconfigured' to 'Initializing' 
2019-10-23 11:12:53     ap7532-71C0D4  DIAG       NEW_LED_STATE        LED state message WIOS_LED_NO_COUNTRY_0_24G from module DOT11
2019-10-23 11:12:53     ap7532-71C0D4  RADIO      RADIO_STATE_CHANGE   Radio 'ap7532-71C0D4:R1' changing state from 'Initializing' to 'Off(no country-code)' 
2019-10-23 11:12:53     ap7532-71C0D4  DIAG       NEW_LED_STATE        LED state message WIOS_LED_NO_COUNTRY_0_24G from module DOT11
2019-10-23 11:12:53     ap7532-71C0D4  RADIO      RADIO_STATE_CHANGE   Radio 'ap7532-71C0D4:R1' changing state from 'Unconfigured' to 'Initializing' 
2019-10-23 11:12:53     ap7532-71C0D4  MESH       MESHPOINT_LOOP_PREVENT_OFF Meshpoint loop prevention off (port ALL), all wired traffic is allowed
2019-10-23 11:12:53     ap7532-71C0D4  DIAG       NEW_LED_STATE        LED state message AP_LEDS_ON from module DOT11
2019-10-23 11:12:53     ap7532-71C0D4  DIAG       NEW_LED_STATE        LED state message LED_NO_COUNTRY_CODE_SET from module DOT11
2019-10-23 11:12:53     ap7532-71C0D4  MINT       RFDM_MGR_UPDATE      own_mint_id 1b.71.c0.d4 sitemgr_mint_id 1b.71.c0.d4
2019-10-23 11:12:52     ap7532-71C0D4  MINT       RFDM_MGR_UPDATE      own_mint_id 1b.71.c0.d4 sitemgr_mint_id 00.00.00.00
2019-10-23 11:12:52     ap7532-71C0D4  MINT       RFDM_MGR_UPDATE      own_mint_id 1b.71.c0.d4 sitemgr_mint_id 1b.71.c0.d4
2019-10-23 11:12:52     ap7532-71C0D4  MINT       RFDM_MGR_UPDATE      own_mint_id 1b.71.c0.d4 sitemgr_mint_id 00.00.00.00
2019-10-23 11:12:52     ap7532-71C0D4  DIAG       NEW_LED_STATE        LED state message LED_LOCATIONING_OFF from module cfgd

log from ap7532-743E6C

2019-10-23 11:16:27     ap7532-743E6C  SYSTEM     CONFIG_REVISION      Configuration revision updated to 4 from 3
2019-10-23 11:14:27     ap7532-743E6C  SYSTEM     WARM_START_RECOVER   Warm Start Recover. Reason: Upgrade done, reloading... (user: system @ vx9000-1D96AB) Timestamp: Oct 23 11:11:58 2019
2019-10-23 11:14:26     ap7532-743E6C  SYSTEM     CONFIG_REVISION      Configuration revision updated to 3 from 3
2019-10-23 11:14:26     ap7532-743E6C  SYSTEM     CONFIG_COMMIT        Configuration commit by user 'cfgd' (update own config) from '127.0.0.1'
2019-10-23 11:14:29     ap7532-743E6C  SYSTEM     CLOCK_RESET          System clock reset, Time: 2019-10-23 11:14:26
2019-10-23 11:14:29     ap7532-743E6C  DEVICE     ADOPTED_TO_CONTROLLER Joined successfully with controller 'vx9000-1D96AB'(12.1D.96.AB)
2019-10-23 11:14:29     ap7532-743E6C  DIAG       NEW_LED_STATE        LED state message adopted-event from module cfgd
2019-10-23 11:14:02     ap7532-743E6C  MINT       RFDM_MGR_UPDATE      own_mint_id 1b.74.3e.6c sitemgr_mint_id 1b.71.c0.d4
2019-10-23 11:14:01     ap7532-743E6C  MINT       RFDM_MGR_UPDATE      own_mint_id 1b.74.3e.6c sitemgr_mint_id 1b.74.3e.6c
2019-10-23 11:13:56     ap7532-743E6C  NSM        DHCPIP               Interface vlan1 acquired IP address 172.17.8.30/24 via DHCP
2019-10-23 11:13:56     ap7532-743E6C  NSM        DHCPDEFRT            Default route with gateway 172.17.8.254 learnt via DHCP
2019-10-23 11:13:00     ap7532-743E6C  MINT       RFDM_MGR_UPDATE      own_mint_id 1b.74.3e.6c sitemgr_mint_id 1b.71.c0.d4
2019-10-23 11:12:55     ap7532-743E6C  DIAG       NEW_LED_STATE        LED state message WIOS_LED_NO_COUNTRY_1_52G from module DOT11
2019-10-23 11:12:55     ap7532-743E6C  RADIO      RADIO_STATE_CHANGE   Radio 'ap7532-743E6C:R2' changing state from 'Initializing' to 'Off(no country-code)' 
2019-10-23 11:12:55     ap7532-743E6C  DIAG       NEW_LED_STATE        LED state message WIOS_LED_NO_COUNTRY_1_52G from module DOT11
2019-10-23 11:12:55     ap7532-743E6C  RADIO      RADIO_STATE_CHANGE   Radio 'ap7532-743E6C:R2' changing state from 'Off' to 'Initializing' 
2019-10-23 11:12:54     ap7532-743E6C  DIAG       NEW_LED_STATE        LED state message WIOS_LED_NO_COUNTRY_0_24G from module DOT11
2019-10-23 11:12:54     ap7532-743E6C  RADIO      RADIO_STATE_CHANGE   Radio 'ap7532-743E6C:R1' changing state from 'Initializing' to 'Off(no country-code)' 
2019-10-23 11:12:54     ap7532-743E6C  DIAG       NEW_LED_STATE        LED state message WIOS_LED_NO_COUNTRY_0_24G from module DOT11
2019-10-23 11:12:54     ap7532-743E6C  RADIO      RADIO_STATE_CHANGE   Radio 'ap7532-743E6C:R1' changing state from 'Off' to 'Initializing' 
2019-10-23 11:12:54     ap7532-743E6C  DIAG       NEW_LED_STATE        LED state message WIOS_LED_NO_COUNTRY_1_52G from module DOT11
2019-10-23 11:12:54     ap7532-743E6C  RADIO      RADIO_STATE_CHANGE   Radio 'ap7532-743E6C:R2' changing state from 'Initializing' to 'Off(no country-code)' 
2019-10-23 11:12:54     ap7532-743E6C  DIAG       NEW_LED_STATE        LED state message WIOS_LED_NO_COUNTRY_1_52G from module DOT11
2019-10-23 11:12:54     ap7532-743E6C  RADIO      RADIO_STATE_CHANGE   Radio 'ap7532-743E6C:R2' changing state from 'Unconfigured' to 'Initializing' 
2019-10-23 11:12:54     ap7532-743E6C  DIAG       NEW_LED_STATE        LED state message WIOS_LED_NO_COUNTRY_0_24G from module DOT11
2019-10-23 11:12:54     ap7532-743E6C  RADIO      RADIO_STATE_CHANGE   Radio 'ap7532-743E6C:R1' changing state from 'Initializing' to 'Off(no country-code)' 
2019-10-23 11:12:54     ap7532-743E6C  DIAG       NEW_LED_STATE        LED state message WIOS_LED_NO_COUNTRY_0_24G from module DOT11
2019-10-23 11:12:54     ap7532-743E6C  RADIO      RADIO_STATE_CHANGE   Radio 'ap7532-743E6C:R1' changing state from 'Unconfigured' to 'Initializing' 
2019-10-23 11:12:54     ap7532-743E6C  MESH       MESHPOINT_LOOP_PREVENT_OFF Meshpoint loop prevention off (port ALL), all wired traffic is allowed
2019-10-23 11:12:54     ap7532-743E6C  DIAG       NEW_LED_STATE        LED state message AP_LEDS_ON from module DOT11
2019-10-23 11:12:54     ap7532-743E6C  DIAG       NEW_LED_STATE        LED state message LED_NO_COUNTRY_CODE_SET from module DOT11
2019-10-23 11:12:53     ap7532-743E6C  MINT       RFDM_MGR_UPDATE      own_mint_id 1b.74.3e.6c sitemgr_mint_id 1b.74.3e.6c
2019-10-23 11:12:53     ap7532-743E6C  MINT       RFDM_MGR_UPDATE      own_mint_id 1b.74.3e.6c sitemgr_mint_id 00.00.00.00
2019-10-23 11:12:53     ap7532-743E6C  MINT       RFDM_MGR_UPDATE      own_mint_id 1b.74.3e.6c sitemgr_mint_id 00.00.00.00
2019-10-23 11:12:53     ap7532-743E6C  DIAG       NEW_LED_STATE        LED state message LED_LOCATIONING_OFF from module cfgd
2019-10-23 11:12:51     ap7532-743E6C  MGMT       LOG_HTTP_START       lighttpd started in external mode
2019-10-23 11:12:51     ap7532-743E6C  SYSTEM     SYSTEM_AUTOUP_ENABLE Autoupgrade enabled for ap7562
2019-10-23 11:12:51     ap7532-743E6C  DIAG       NEW_LED_STATE        LED state message LED_LOCAL_LICENSE from module CFGD
2019-10-23 11:12:51     ap7532-743E6C  SYSTEM     SYSTEM_AUTOUP_ENABLE Autoupgrade enabled for ap7522
2019-10-23 11:12:51     ap7532-743E6C  DIAG       NEW_LED_STATE        LED state message LED_LOCAL_LICENSE from module CFGD
2019-10-23 11:12:51     ap7532-743E6C  SYSTEM     SYSTEM_AUTOUP_ENABLE Autoupgrade enabled for ap7532
2019-10-23 11:12:51     ap7532-743E6C  LICMGR     LIC_INSTALL_DEFAULT  AP default license installed, count: 64
2019-10-23 11:12:51       MGMT       LOG_HTTP_START       lighttpd started in external mode
2019-10-23 11:12:51       MGMT       LOG_HTTP_START       lighttpd started in external mode
2019-10-23 11:12:51       DHCPSVR    DHCPSVR_STOP         DHCP server is stopped
2019-10-23 11:12:53       NSM        IFUP                 Interface ge1 is up
2019-10-23 11:12:50       SYSTEM     CONFIG_REVISION      Configuration revision updated to 3 from 2
2019-10-23 11:12:50       SYSTEM     CONFIG_REVISION      Configuration revision updated to 2 from 1
2019-10-23 11:12:51       NSM        IFDOWN               Interface ge1 is down
2019-10-23 11:12:50       SYSTEM     CONFIG_COMMIT        Configuration commit by user 'cfgd' (read startup-config) from '127.0.0.1'
2019-10-23 11:12:51       NSM        IFUP                 Interface vlan1 is up

show upgrade from AP:

ap7532-71C0D4#show upgrade?
  upgrade-status  Display last image upgrade status

ap7532-71C0D4#show upgrade

Regards,

 

Aviv

0 Kudos

Go to solution
vanelm
Contributor

‎10-23-2019 07:29 AM

Hello Aviv,

  Please note that

  1. Upgrade always happens with RFDM unless you specify “from-controlled” explicitly
  2. UPGRADED-BY shows device, who is actually handle the upgrade i.e. control the process, hosts the AP image etc
  3. In case you upgrading many RFD from active-active (not recommended) VX cluster - perhaps you will have these upgrading activities shared between nodes

vx9000-5566BE#device-upgrade rf-domain TEST all ?

  force             Force upgrade of devices in the rf-domain

  from-controller   Upgrade devices from the adopted device

  no-reboot         No reboot (manually reboot after the upgrade)

  reboot-time       Schedule a reboot time

  staggered-reboot  Reboot one at a time without network being hit

  upgrade-time      Schedule an upgrade time

  <cr>
 

Misha

0 Kudos

Go to solution
ckelly
Extreme Employee

‎10-22-2019 03:20 PM

The results of the MINT links and neighbors looks correct.

 

Can you run the device upgrade history command directly on the AP’s themselves?

Specifically interested in the output from the non-RFDM AP.

 

0 Kudos

Go to solution
Christopher_Fra
Extreme Employee

‎10-22-2019 03:12 PM

Hello Aviv,

      Please use the attached when upgrading VX9 and adopted remote APs.

Preview file
228 KB
0 Kudos

Go to solution
Aviv_Kedem
Contributor

‎10-22-2019 02:35 PM

Hello Misha,

Upgrade process is looking OK, but I expecting to see from show device-upgrade history 

something like: UPGRADED-BY - ap7532-743E6C, but I don’t see that.

Also I don’t see any temp firmware file stored on the flash of the RFDM AP, as expected.

So, I think the upgrade is accomplished through VX9000 without RFDM AP, so the file is transferred twice.

Thanks,

 

Aviv

 

0 Kudos
GTM-P2G8KFN