vx9000 - wing 5.9 - channel utilization

[Brama]

Hi,

Is it possible to see channel utilization percentage from certain rf domain through cli or gui within the vx9000?

Thank you.

[Christoph_S · Accepted solution]

Hello Brama,

This command should provide you with channel utilization info:
 

VX9k-7X#show wireless radio statistics rf on <rf-domain-name>
------------------------------------------------------------------------------------------------------------
  Retry AVG   : Average retransmissions per packet
  ERRORS      : Error Rate of rx errors and retries over good packet per second
  Q-INDEX     : RF Quality Index, higher value means better quality
  (I)         : RF matrix index where 0,1,2,3,4,5 maps to N/A,Poor,Fair,Average,Good,Excellent respectively
------------------------------------------------------------------------------------------------------------
------------------------------------------------------------------------------------------------------------
RADIO                   SIGNAL NOISE     SNR    TX-RATE    RX-RATE RETRY  ERRORS Q-INDEX    RETRY    CH-UTIL
                      (dbm)(I) (dbm)   db(I)  (Mbps)(I)  (Mbps)(I)   AVG   (pps)     (I)   (%)(I)    (ch)(%)
------------------------------------------------------------------------------------------------------------

Rgds