WING Online Device - remote device / port

[mstezowski]

Hi,

VX9000, WING 7.6.3.1

I searched the documentation, but I did not find the appropriate command. I need a command to display, which switch the AP is connected to.

This information is available in the old GUI. Can I get this information from CLI?

[Claudia]

As alternative you could customize the ‘show adoption status’ and include the LLDP information in this output.

[mstezowski]

Thank you Chris,

command show lldp report on <rf-domain> was what I was looking for.

[ckelly · Accepted solution]

Try the commands (on the controller)

show lldp report on <AP>

show lldp neighbors on <AP>

Or run those commands directly on the APs w/o the “on <AP>” part.