FAQs - Page 70 - Extreme Networks

FAQs

Frequent Asked Questions

Forum Posts

Sorted by:

Start a conversation

Enterasys Controller f/w 8.11.07.0007 AP Deadlock Error Message logged during an AP Reboot

Article ID: 14940 Products Enterasys (formerly HiPath) Wireless Controllers C20, C25, C4110, C5110, V2110; firmware 8.11.07.0007 Enterasys (formerly HiPath) thin Access Points RBT-4102, RBT-4102-EU, AP26xx, AP36xx Changes One or more managed Acce...

Enterasys Wireless f/w 8.11.07.0007 randomly Dropping Apple iOS devices

Article ID: 14974 Products C20, C25, C4110, C5110, C5210, V2110; firmware 8.11.06.0006, 8.11.07.0007, 8.21.01.0198 Enterasys (formerly HiPath) Wireless Controller Symptoms Apple iOS clients (e.g. iPhone, iPad, iTouch) occasionally drop their wire...

800-Series has "Failed to initialize web server" error

Article ID: 15021 Products 800-Series Changes Recent firmware upgrade. Symptoms Cannot access web management. Error message displayed on console during boot up:Caution: Failed to initialize web server. The web service is unavailable. The web ...

S-Series f/w 8.02.01.0012 Upgrade leaves IP Interface failed with "restoreIpAddressData():deserialize failed" errors

Article ID: 15033 Products S-Series, firmware 8.02.01.0012 Changes One or more interfaces were created/configured using any firmware 7.00-7.03 (pre-7.11) version. Then if the system was upgraded to within the firmware 7.11-8.01 range (this may or...

S-Series f/w 8.11.01 can Remove Inbound ACLs after Upgrade

Article ID: 15104 Products S-Series; firmware 8.11.01.0014, 8.11.01.0015 Changes Created one or more Inbound ACLs, then upgraded to firmware version 8.11.01.001x, then made one or more additional ACL changes. Symptoms Any IP or IPv6 ACL applied...

Top Kudoed Authors

User

Count

26

1

1

1

1

GTM-P2G8KFN