FAQs - Page 69 - Extreme Networks

FAQs

Frequent Asked Questions

Forum Posts

Sorted by:

Start a conversation

I/G/C5/C3/C2/B5/B3-Series with "MRT: assertion (0) failed..." messages scrolling in Serial Console

Article ID: 13806 Products I-Series, firmware 6.42.03.0004 through 6.61.06.0009 G-Series, firmware 6.42.03.0004 through 6.61.06.0009 C5-Series, firmware 6.42.03.0004 through 6.61.06.0009 C3-Series, firmware 6.42.03.0004 through 6.61.06.0009 C2-Seri...

Can the SecureStacks & D/G/I-Series do IGMP Snooping or Querying?

Article ID: 6950 Products SecureStack C3, C2, B3, B2, A2 D-Series G-Series I-Series Goals IGMP Snooping. IGMP Querying. Multicast support. Solution All of these products support IGMP Snooping (scoping of multicast traffic to only the VLAN's sub...

IdentiFi Wireless Controller Management GUI is Unresponsive

Article ID: 14862 Products C4110, C5110, C25, C5210, IdentiFi, Wireless Controllers, HiPath, Enterasys Wireless Controllers Changes Administrator recently upgraded their IdentiFi controller to the 8.11.x track of firmware. Symptoms The controll...

Enterasys Controller f/w 8.11 Legacy AP Radios are Off and "more than 32 AP filter rules" Messages are Logged

Article ID: 14926 Products Enterasys (formerly HiPath) Wireless Controller (EWC) C20, C25, C4110, C5110, V2110; firmware 8.11.01.0161 and higher Legacy Wireless Access Points (APs) RBT-4102, RBT-4102-EU, AP26xx Symptoms Legacy APs are showing no ...

Enterasys Wireless f/w 8.11.06.0006 Multi-Edit Feature Use can Disable AP Radios

Article ID: 14930 Products Enterasys (formerly HiPath) Wireless Controllers C20, C25, C4110, C5110, V2110; firmware 8.11.06.0006 Enterasys (formerly HiPath) thin Access Points RBT-4102, RBT-4102-EU, AP26xx, AP36xx Changes Used the Multi-Edit feat...

Top Kudoed Authors

User

Count

26

1

1

1

1

GTM-P2G8KFN