FAQs - Page 96 - Extreme Networks

FAQs

Frequent Asked Questions

Forum Posts

Sorted by:

Start a conversation

Configure SNTP on a SecureStack

Article ID: 5571 Products SecureStack C3 SecureStack C2 SecureStack B3 SecureStack B2 SecureStack A2 C5, B5, A4-Series Protocols/Features SNTP Goals Sample configuration Solution Here is an example "Simple Network Time Protocol" (5855) config...

Securestack SNTP Poll-Interval Command Syntax change for RFC1305 Compliance

Article ID: 9843 Products SecureStack C3, C2, B3, B2 Changes Upgraded the SecureStack. Symptoms The SNTP Poll Interval ('set sntp poll-interval...') command set has changed. Cause This is due to a design change, for compliance with RFC1305. U...

I/G/D/C/B/A-Series Modification of an Active SNTP Poll Interval

Article ID: 14382 Products I-Series G-Series D-Series C5, C3, C2-Series B5, B3, B2-Series A4, A2-Series Goals Behavior expectation when modifying a Simple Network Time Protocol (SNTP) poll interval ('set sntp poll-interval...') while SNTP is acti...

In what Chassis can a Matrix DFE Switch be Installed

Article ID: 5275 Products Matrix N-Series DFE 7C111 7C107 7C103 6C107 6C105 7H4382-25 7H4382-49 7H4383-49 7G-6MGBIC Goals Special characteristics of the 7H4382-25 Dfference between Matrix N1 / N3 / N7 / E7 / E6 chassis Symptoms 7H4382-49 will n...

DFE with Red CPU LED when installed in 7C111 ('N1') Chassis

Article ID: 5604 Products DFE Firmware 5.11.29 and lower 7C111 Changes Installed DFE blade into N1 chassis Symptoms Won't boot Red CPU LED Cause DFE modules require firmware version 5.12.02 or higher to work properly in a 7C111 chassis. Whe...

Top Kudoed Authors

User

Count

26

1

1

1

1

GTM-P2G8KFN