What are the 5Ghz non-DFS, non-overlapping channels?

[Laura4]

What are the 5Ghz non-DFS, non-overlapping channels?

[dflouret]

Laura,

Hope this helps

[Ronald_Dvorak]

Looks fine to me...

[Laura4]

So if I were to use 5Ghz, non overlapping. non DFS channels at 40MHz, I could use 36 , 44, 149, and 157? Would that work?

[Ronald_Dvorak]

If the client is connected to the AP/controller you'd look into the GUI > Report > Clients.
The column Avg. Rate Sent/Rec gives a small clue what the client is capable off.

-Ron

[wyfy]

Hi
is there way to know adapter support 2x2 MIMO ,or 1x1 . Normally vendors does not include it in their datasheet .
And if you see other vendors test result (iperf ) they are using tcp and published result is same like 150 when the phy rate is 300 Mbps
Thanks