Hello everyone I tried to update mine And now I get: Booting... Testing main memory - PASSED Starting... Ethernet Routing Switch 4548GT Boot Version 5.0.0.9 Fri Dec 29 10:11:21 2006 Hardwa...
Hi all I've a strange issue with my settings. When ERS stack is just starting all my FA Binding with x435 are ok, but if I plug an x435, FA dosen't bind ! I must disable eap and fa on the interface ...
I'm investigating configuring Fabric Attach to our 4800's/4900's, and had a few questions. 1. I haven't found much documentation for setting this up, and setting up the corresponding VSP ports. Some...
...opology Change count, nor the Root Bridge changes. Obviously, the number of changes displayed are high (stack has been up ~250 days). All ports have edge-port true and most have bpdu-filtering. &n...
Hello everyone. I have a question about VLAN setting of ERS3549GTS v5.2.0.004. I couldn't figure it out by looking at the CLI reference. Q1.vlan port [port number] pvid [vid] ・"pvid = Port VLAN I...
Good Morning All, I am banging my head on successfully modifying the DSCP code for MS Teams traffic. I have read the QOS PDF and the Knowledge article that shows which TCP/UDP ports are used for Voi...
I am hoping someone has dealt with this issue before. Does Extreme have recommendations and command line information for implementing qos for Microsoft Teams at the edge? Currently using ERS4950's. A...
Hi Team, i did one mistake in ERS3600 series switches. this switch os version is 6.1.0.0 i tired to reset the switch following way. First restart the switch. booting time press the Ctrl+C ...
Hi team!!! I´m looking for OID to monitoring “Dropped On No Resources” packets discards on ERS4900 switches and I found: - if in discards (1.3.6.1.2.1.2.2.1.13) --> The number of inbound...