Hi, We currently have two X670G2-48x-4q stacks with two stacking nodes each. They are configured for alternate stacking. Each stack uses all the available stacking ports 1:47, 2:47, 1:48 & ...
hey, I have a stack of x440 g2 switches. recently one of the switches in the stack failed and was replaced via RMA. Switches are added to XMC from where they download NAC policies. I wonder if ther...
Hi all, I am new to Extreme switching and currently looking to replace existing Huawei Core switches with two switches 5420 for redandancy ,and replace existing Access switches with the X435 models ...
Hello, So I've currently got inherited a large Extreme network across multiple sites made up of x440-g2 edge switching with X660 core switches. I need to remove one of the X660 switches to utilise ...
Hello! I get messages in log on switch extreme x590 from time to time like below: 11/03/2023 16:45:13.87 \<Noti:Card.IPv4Adj.Notice\> vrId 131074 adj 99.181.65.44: Unable to delete ...
When creating an acl that allows traffic from two Macs and denies connecting another Mac, I do not see an event in the log when the created counter is applied.
The event counter goes up but I don't s...
help, i just start learning networking. How to connect 2 or more vlan, for example i make 3 vlan (10, 20 and 30) vlan 10 is from port 1 - 5, vlan 20 is from port 6 - 10 and vlan 30 is from port 11 -...
I have a 5 stack 5520 switch with 4 links to two X690's at the core. Its currently configured like so: enable sharing 1:57 grouping 1:57,2:57,4:57,5:57 algorithm address-based L3_L4 lacp We...
Hello, I have a .pol applied for ssh access which is working with a bunch of IP's allowed access. But I can't find a way to update the file while live. I can add to the file a new IP or range, exit w...