Could anyone please advise me on the power consumption of the 5520-48W switches? Specifically, if we were to purchase three of these switches, what would be the total power consumption?
Hi all,We have some L3 switches in our network with loads of static routes, we are also using OSPF for routing but he number of static routes are really high and I am hopping to get rid of many of them,My question, is there any way to log the static ...
I have a question about the AP 305C authorization. AP 305C is Set Wing OS and let it to VX9000 management. In this mode, if AP305C is needed to manage on XIQ, do I need to purchase Navigator license or Pilot license?”
HiI had a problem with one Stack in the XMC.Here is th case:the XMC could save the konfiguration of the Stack but we had restarted the stack and after the restarting ,the XMC could not save the konfiguration again . what could be the problem ? .Note ...
Scope of project:I have 2 Extreme 220-12P-10GE2 switches that I'm attempting to use interface port 13 to trunk together using 30M CAT SFP+ adapters. Multicast needs to be available for VLAN 10 (being used for AVoIP hardware), and also allow for traff...
