cancel
Showing results for 
Search instead for 
Did you mean: 

HARDWARE STATUS OF A PORT

HARDWARE STATUS OF A PORT

abhijit_roy
New Contributor

Hi All, I am new here, just willing to know is there any way to know a particular port is going in bad state in respect of hardware, or you can say the port is healthy or not, my switch is X440G2-48p-10G4, many thanks in advance.

1 ACCEPTED SOLUTION

Tomasz
Valued Contributor II

Hi,

 

If it’s copper ports you can try to check Tx/Rx error statistics (EXOS: show port <..> txerrors, show port <..> rxerrors), you may find how many errors of different types are there. Please see EXOS Command Reference Guide or EXOS User Guide for more details on these commands: https://www.extremenetworks.com/support/documentation/extremexos-31-1/

Those may, however, not necessarily tell you if its the switch port itself that has issues, or is it the cable for example.

 

Hope that helps,

Tomasz

View solution in original post

1 REPLY 1

Tomasz
Valued Contributor II

Hi,

 

If it’s copper ports you can try to check Tx/Rx error statistics (EXOS: show port <..> txerrors, show port <..> rxerrors), you may find how many errors of different types are there. Please see EXOS Command Reference Guide or EXOS User Guide for more details on these commands: https://www.extremenetworks.com/support/documentation/extremexos-31-1/

Those may, however, not necessarily tell you if its the switch port itself that has issues, or is it the cable for example.

 

Hope that helps,

Tomasz

GTM-P2G8KFN