Hi, Can you please explain it in more detail, I could not get it correctly. --- Thanking You Abhijit Roy IRCC, IIT BOMBAY Sr. Executive-II, Technical On 2022-05-19 18:54, Gabriel_G via Extreme Networks wrote: Hello, Could you confirm how l...
Hi All, I am facing an issue in last couple of months, I have 4 no's of X440G2-48p-10G4 access switches in the network, one of the switch in the network got connected with above mentioned IP Phones like as follows due to scarcity of the physical...
Hi All, I am facing an issue in last couple of months, I have 4 no's of X440G2-48p-10G4 access switches in the network, one of the switch in the network got connected with above mentioned IP Phones like as follows due to scarcity of the physical...
Hi All, I am facing an issue regarding incremental packet drop on a particular port with Rx Frag value is also increasing, I have checked/alter cables but nothing rectified following is the packet statistics of that port Port Packet StatisticsP...
Hi All, Please help me to find out exact root cause of following caseI have recently install X440G2-48p-10G4 in our network with ExtremeXOS version 31.1.1.3 31.1.1.3-patch1-1 by release-manager, in fact all of our old switches are same model, configu...
Hi, Sorry for delayed response, here is following statistics of port utilizationLink Speed Rx % bandwidth Peak Rx % bandwidth Tx % bandwidth Peak Tx bandwidth100 0.00 2.38 ...
Hi, I have observed in detail, as per your suggestion, following is the details1. There is some congestion in some workstation ports in network, but there is no major problem.2. There is no rxerror.3. yes in show ports flow-control there is huge co...
Hi Gabriel,Following is my concerns in detail for this caseThis type of connections of IP Phones has been enabled in my network from last couple of months, and following are consequences of such(I am suspicious of that)a) Some P.C internet connection...
Hi ,Thanks for your suggestion, also kindly suggest what will be the Extreme recommended standard practice to set up network on this kind of situation, and how to detect if there is any error on end point devices or switch port vice versa on such ...
