Network Architecture & Design
Questions and discussions about network architecture and design in general
cancel
Showing results for 
Search instead for 
Did you mean: 

Forum Posts

VDX 6740 and Brocade MCT

Hello, Can a Brocade ICX-7750 switch and a VDX-6740 be in a Brocade MCT (Multi Chasis Trunk) cluster together? In other words does the VDX switch series support the Brocate MCT achitecture? Thanks in advance.

Gaetan by New Contributor
  • 925 Views
  • 3 replies
  • 0 kudos

MLAG Peer Distance

We are wanting to MLAG our schools to our WAN switches that are throughout our district. Our WAN switches are x670G2-48x-4q running 16.2.2.4. They all connect to each other at 10Gb on our own dark fiber network. Our schools (currently) connect to on...

bw447 by New Contributor III
  • 994 Views
  • 3 replies
  • 1 kudos

Connecting B5G and x450

I'm working on a solution to better cable my data center cabinets. Currently: The prior admin ran cabling from the servers to a patch panel at the top of each rack, which then was cabled across the racks to the core. The "patch panel" was just a ma...

Stop layer 2 loop with legacy to MLAG pair

Hi, The design intention is to provide connectivity to VLAN X & Y should either one of the legacy cores fail, unfortunately it has to be this way with the VLANs stretched across. I could equally create a LAG that that goes from one of the legacy co...

db9970b81ad44678995fc32c8c265d19_RackMultipart20180403-28613-112hoyy-MLAG-SRP_inline.png
Anonymous by Not applicable
  • 1064 Views
  • 5 replies
  • 1 kudos
GTM-P2G8KFN