Could we create Stacking over two switches?
Could we create Stacking over two switches?
Could we create Stacking over two switches?
We have Core A and Core B Cisco switch's both are working in active-active and deployed in Building A, and in our environment, all access switch's are X440-G2 have edge license? Now I want to connect these core switches to Building B, so I now am cre...
I have a situation where I need to restrict traffic from a specified client subnet to another server subnet. I have done this by creating a blanket deny between subnets which works fine. I now need to allow traffic between the same two subnets but ...
Hi,we have a request to make WoL possible in our network.I already found that aritcle: https://extremeportal.force.com/ExtrArticleDetail?an=000082951but I have a few issues:The first method doesn't work here. I can see, that "show udp-profile" forwar...
Hello, Problem When using 3 x670_48x switches in a stack (native) at a client, I'm experiencing high stack-port utilization. This reaches 100 percent on certain stack ports. I am using native v160 stacking. The firmware used on these switches is 15....