Hi everyone, One of our customer uses Cisco GLC-EX-SMD (1000BASE-EX SFP transceiver module, SMF, 1310nm, 40km, DOM) GBIC and wants to use the equivalent of an Extreme SFP instead about 200 amounts. We decided to give MGBIC-08 1000BASE-ELX (70KM) 1 LC...
Hello, I've problems during a migration from A2H254-16 to X440-G2-12t8fx-GE4 on fixed 100FX ports. Currently I've 100FX Microsens mini-switches connected via breakout-cable to mtrj 100FX Ports on A2. I used a mtrj/mtrj adaptor and mtrj/lc cable...
Hi, I have two links for different ISPs. My question is how can I test the principal link (default route) by a health check ICMP with next hope and in case of fail, the router S8 automaticaly change the default route for the secondary link. Tks fo...
We have this question come up from time to time where we come off one switch and build redundant fiber paths to another stand alone switch. Most of the times we will build a simple EAPS ring between the connected ports and make the far switch the ma...
I have a simple setup - two core switches (8800s), several edge switches (460s) connected like this: 8800s are running 16.1.3.6-patch1-9, 460-1 is on 15.4.1.3, 460-2 is on 15.6.1.4. My problem is that the 460s are on 1GB fiber (ports 55,57) and I ne...
