Network Architecture & Design - Page 97 - Extreme Networks

Network Architecture & Design

Questions and discussions about network architecture and design in general

Forum Posts

Sorted by:

Start a conversation

Management Access to Avaya 8300/8600 Switch via NAC RADIUS Server.

There is Avaya 8300 switch and NAC. I need to management login to switch CLI via NAC RADIUS. In documentation to Avaya 8300 switch I read, that there is Avaya VSA - "Access-Priority" wich need to be sent by RADIUS accept message from RADIUS Server to...

NAC & Wireless Controller Support IPv6?

Hi, Our Customer has the pure IPv6 network environment. they install the NAC, NetSight, Wireless Controller v9, B5G124-24P. They has DHCPv6 server, they want to need the function as below: 1. Wireless Controller, Access Point, Switch, NAC can be man...

Flows on Purview

What is different between flow and session? Most of firewall keep the session information for the traffic. Can we use that information to calculate the requirement of the flow/mins license for Preview Engine? Thanks.

C3 continous rebooting when loading the operational code.

Good Morning: I start a conversation due to failure one of our switch. I enclose the log details for your further analisys. 1) Switch C3G124-24 2) Firmware Version 01.00.46 07-28-2008 3) Sympton: Rebooting endless while loading operational co...

Problem With Port QSFP+ 40G to 4x10G

hello I have the following situation: I have a Switch summit x670. I have configured 2-port QSFP + as 4x10G each, in which I am connecting a cable with MPO connector to 6 lc connectors. The problem is that when I connect the cable, I have no lin...

Top Kudoed Authors

User

Count

4

3

3

3

GTM-P2G8KFN