cancel
Showing results for 
Search instead for 
Did you mean: 

Extreme VSS and NFS (CISCO)

Extreme VSS and NFS (CISCO)

Tavares_Belmont
New Contributor II
Hello guys,

I would like to connect two switches stack and configure they like a NFS or VSS like cisco devices, to provide more redundancy if one member fail all traffic, RIB, mac-table and so on will be forwarded to another member, its possible do it with extreme switch?

11 REPLIES 11

Tavares_Belmont
New Contributor II
Hum i see, however my costumer decided to manage two stacks switchs as if they were just a one... If i configure MLAG i cant do it correct?

Bill_Stritzinge
Extreme Employee
Tavares,

Yes VSB (Very similar to VSS) can be done with S Series (EOS Operating System) and MLAG is done with XOS (Legacy purple products..).

Bill

Tavares_Belmont
New Contributor II
Bill,

I found this document talk about VSB on page 17, http://learn.extremenetworks.com/rs/extreme/images/Data-Center-Design-Guide.pdf

its the same to configure vss?

Tavares_Belmont
New Contributor II
😄

Thanks i´ll.

Bill_Stritzinge
Extreme Employee
Tavares,

You cannot configure two stacks together, they would be two separate control/data planes. We do have a solution called MLAG that would allow for the same solution but the configuration is separate, the details are here: http://documentation.extremenetworks.com/exos/EXOS_All/Slots_and_Ports/c_blackdiamond-x8-series-swit...

Take a look...

Bill

GTM-P2G8KFN