The ML-2452-PTA3M3 antenna has three antenna ports and supports MIMO.
The AP310 has four (excluding BLE) antenna ports.
My question - on which ports of the AccessPoint should I connect the three connectors of the antenna and which antenna settings do I have to consider for the AccessPoint configuration?
I found another similar question - but without an answer:
ExtremeWireless (WiNG)
Extremenetworks |
remove preview |
![fc76d037715a4a8ab825b521ebe14110_56f1d559-f5e7-4740-a626-d9e19ee1bcd8.jpg fc76d037715a4a8ab825b521ebe14110_56f1d559-f5e7-4740-a626-d9e19ee1bcd8.jpg](/t5/image/serverpage/image-id/167i97264F9A3AD8A0EE/image-size/large?v=v2&px=999) |
ExtremeWireless (WiNG) |
Hi,The antenna guide in page 28 lists all the compatible antennas for AP7522 EMEA.For Patch antennas there is a (*) for ML-2452-PTA3M3-036 which has three(3) co |
View this on Extremenetworks > |
|
|
Thanks!