Hello Extreme Forum,
I want to create 2 untagged VLANs on an SecureStack B2.
The ports 1-32 + 47-48 should be used by the office net.
In this case I use VLAN 1.
Everything works fine, I can connect to the other stations.
Ports 33-46 should be used in as GuestWiFi (VLAN 2).
When I connect 2 or more devices in the ports 33-46, no communication is possible.
I can't ping or connect.
VLAN 1 and VLAN 2 should be separated as untagged ports.
There is no need to communicat between both VLANs.
Here one more what is the configuration:
Static List:
1 Default Enabled
2 GuestWIFI Enabled
VLAN Static Table
1 Default
Egress ge.1.1-32, ge.1.47-48
Forbidden Egress
Untagged ge.1.1-32, ge.1.47-48
2 GuestWIFI
Egress ge.1.33-46
Forbidden Egress
Untagged ge.1.33-46
Where do I have the mistake?
thanks Martin
