Ports connected to single MLAG id?
We have Core switches(X-670) that connected to X440(48 ports) stacks of 4 switches. Is this supported "48 ports * 4 switches =192 ports" connected to single MLAG id?
Forum Posts
Eaps 4 switch ring w/ MLAG
Hi, I have a bit of confusion around the configuration of the design on a network we have built. We have four sites, connected by 2 * 10 gig fibre runs. 2 of the sites (2 and 4) are then connected via their own 2 * 10 gig fibre runs for additional ...
Can the x450-g2-24t-10ge4 support up to 24k ipv routes ? Can this sw support up to 2k hosts ipv4 ?
Can the x450-g2-24t-10ge4 support up to 24k ipv routes ? Can this sw support up to 2k hosts ipv4 ?
Authentication Mode Optional - Older Code
Hi, In the process of configuring MAC based Netlogin on some older switches, the configuration will look something like the following: create vlan nt_login configure netlogin vlan nt_login configure netlogin add mac-list ff:ff:ff:ff:ff:ff 48 config...
220-switches stacking
Hello, everybody, There are several questions about 220's stacking: 1) Could I stack 24 and 48 ports models? 2) Is the 10GB-C01- SFPP right cable model for 220 switches? 3) Do I need 4 cables for four switches, right? 4) Would it be the classica...
