Extreme Networks

andreas_brueck · 02-11-2020

Hello everybody, we have some trouble with sticky clients which does not roam to a better access point. Because of that i activated the option Weak Signal Probe Request Suppression for my 2,4 and 5 Ghz radio profiles. After that i did a complete conf...

andreas_brueck · 02-03-2020

Hello everybody, is it possible to disable the WebUI on access points via policy? I didn't find any menu where i can do this configuration. I just found this option if i select one access point under the tab "monitor" and click the "edit" button. On...

andreas_brueck · 06-04-2019

Hello everybody, we are using the on-premises Hivemanager NG (build version 12.8.1.2-NGVAMAY18 ) and a lot of AP230 and AP1130 (HiveOS 8.3r4 Mayberry build-195604 ). For monitoring we are using PRTG. I really like the information from the tab "Dashbo...

andreas_brueck · 05-29-2019

Hello everybody, we are using the on-premises Hivemanager NG (build version 12.8.1.2-NGVAMAY18 ) and a lot of AP230, AP250 and AP1130 (HiveOS 8.3r4 Mayberry build-195604 ). I have deifined two custom radio profiles. One for the 2,4 GHz and one for th...

andreas_brueck · 05-13-2019

Hello everybody, we are using the on-premises Hivemanager NG (build version 12.8.1.2-NGVAMAY18 ) and a lot of AP230, AP250 and AP1130 (HiveOS 8.3r4 Mayberry build-195604 ). I want to change the default radio profile to a customized one. But i do not ...

andreas_brueck · 02-12-2020

Shame on me, normaly i take a look on the help page before i ask any questions. Thank you very much for your help.

andreas_brueck · 02-12-2020

The most of the use the maximum of 20 dBm. Ok, i think i will try to reduce the transmit power by 1 dBm step by step. But i hope that the coverage is high enough at our campus. Thank you very much for your help. Brian, what do you know about the opti...

andreas_brueck · 02-12-2020

Ok, thank you Brian. That is very useful to know. So i will still use the configuration as shown in the pictures.

andreas_brueck · 02-12-2020

Thanks, that is nice to know. Yes, we still have some clients with poor RSSI and SNR values. But i think its less than yesterday, i need to observe this the next days. The Maximum Transmit Power is set to 20 dBm for the 5 ghz band and 17 for the 2,4...

andreas_brueck · 02-12-2020

I have an additional question: Is it necessary to set the data rate 24 Mbps to Basic instead of Optional ? So that 12 and 24 Mbps are both set to Basic for 802.11a/b/g or makes it no difference?

Extreme Networks

User Statistics

User Activity

Weak Signal Probe Request Suppression does not work?

Is it possible to disable the WebUI on access points via policy?

Is it possible to collect diagnostic information like channel utilization via SNMP frome the Hivemanager? Are there any custom MIBs available?

When changes take effect, if i edit the used radio profiles?

How can i deploy new radio profiles for running access points?

Re: Weak Signal Probe Request Suppression does not work?

Re: Weak Signal Probe Request Suppression does not work?

Re: Weak Signal Probe Request Suppression does not work?

Re: Weak Signal Probe Request Suppression does not work?

Re: Weak Signal Probe Request Suppression does not work?