Extreme Networks

Hello everyone, I have 2 Extreme switches that have following spesification: Software version: EXOS 21.1.3.7 Hardware version: Summit X670 G2 48X I need to make a load sharing on LAG interfaces based on IPv6 headers. When I try to configure load shar...

Hello Every one! I have 2 X670 Extreme switches. I made an ether channel with lacp method for 2(or more) links. In order to load balancing I have chosen CRC-32 and expected to see all traffics of a flow to be mapped to the same ports inside the both ...

Hello everyone! I have an Extreme switch x620-16x. I need to configure lag port according to source OR destination IP address. So I have to configure as the following commands [configure sharing address-based ...] but the OS cann't recognize the [add...

Hello everyones! I wanna buy a x620 extreme switch with 16 10G ports. I need 2 trunk links including 4 ports each as a lacp LAG. The question is can I configure following properties on it or not: 1-Making more than 8 LACP port in a trunk link 2-Dec...