We have a complicated building with lots of overlap between AP's and would like to have the AP's try DFS channels to prevent interference. (There just aren't enough channels without DFS) We have "Dynamic Frequency Selection configured on the 5Ghz...
Hmm, let me paste a picture, but stripped it out. For reference the image was the Wifi 1 interface configuration for an AP and the screenshot showed the channel selection pull down menu with "Auto" and the 8 non-DFS 5Ghz channels.
Hmm, AP's are using the correct device template and Radio Profile and this is confirmed via the command line, however this this is what I see in the GUI, (Non-DFS Channels only) But, like I said, I can set the channel to a DFS channel via the CLI an...
Hmm, I ssh'd into the AP and saw that even though DFS was enabled in hive manager, it was disabled on the radio profile on the AP. I made a change to the DFS setting "Enable manual channel selection return" and uploaded the Network policy and amazi...
Thanks for the reply. Interestingly, the AP will not even let you set the DFS Channels manually. (It only shows the non-DFS channels and "Auto". ) Must be missing something or maybe this requires a reboot of the AP. Still waiting on Aerohive...
