Extreme Networks

kamelek · 06-12-2024

Hello guys, I have a question. Is it possible to add an additional AP (no root) on the client's side via cable in a Mesh network? The situation looks like this: WWW <-> AP6522 <-> Mesh -> AP7522 <-> Cable -<> AP6532. Generally, the Mesh connection wo...

kamelek · 01-17-2019

Hello, guys. I have a problem with menage AP6532 from RFS4000, I adopt it but when I change config on configuration profile for it (AP6532) and commit, the configuration is send to AP6532 but for a moment and then came back to old config. I had AP...

kamelek · 08-23-2024

Hello guys, the clean up with VLAN an cleaning mac-address-table solve problem. Everything works fine at the moment.Connection without switch works fine. I have 5.8.6.5-002R

kamelek · 01-17-2019

Chris thnak you, this help me. Overides for AP6532 from controller was wrong and after send config to AP it lost connection with AP. Shool mistake  Thanks for yours help all guys. Esspecialy You Chris 

kamelek · 01-17-2019

Hello Cris, yes, contorler adress is 10.0.1.2, AP is 10.0.2.23 with gw 10.0.2.1 It is routed connection beetwen AP and controller. I also have AP6521 with 10.0.99.0 subnet and everthing is ok for it.

kamelek · 01-17-2019

Hello, thanks Robert for replay, there *** no configuration errors. I clear overides on AP6532 leave only IP, but the issu is the same. After mommit new profile it is load to AP6532 , AP6532 lost connect to RFS and after while came backe to ...

Extreme Networks

User Statistics

User Activity

Mesh with two AP with additional cable AP

RFS4000 and AP6532 adopt issue

Re: Mesh with two AP with additional cable AP

Re: RFS4000 and AP6532 adopt issue

Re: RFS4000 and AP6532 adopt issue

Re: RFS4000 and AP6532 adopt issue