I get this error - Error: Failed to download image - Image signature cannot be validated. - on the file summitX-30.6.1.11-patch1-2.xos for the 440-G2. The non-patched version works ok.
Probably a bit much to cover in a post, would recommend having someone look at your set up and help setup your Policy Manager etc.I'll try to answer with a 30,000 ft view.1. I would say no, usually policies are created based on the access you want a...
If you decide to go with stp, in the deployments I do, I leave spanning tree off of uplinks, and keep all the topo changes to the switch(es) in the closet. Only advantage I've found stp over elrp is the bpdu restrict, to keep other switches from bei...
Yes, it is under Management Options in your Wireless Policy. Turn Management options on and you will see it down the list. https://extreme-networks.my.site.com/ExtrArticleDetail?an=000078249&q=turn%20off%20ledI don't see an individual AP setting, so...
As far as I know, you need to configure the lldp settings in the cloud and push those configs from the cloud to the switch. Unfortunately one of the many cli limitations of these 42xx switches.
