Extreme Networks

PeterK

I've EXOS and SwitchEngine switches running 32.7.2 and 32.7.3. Fully integrated in XIQ-SE and Control (NAC). The switches are permanently sending snmp traps/inform for succeeded and failed netlogin sessions.Traps for link-up/down are still disabled.H...

PeterK · 03-19-2026

Has someone successfully started the legacy MIB Browser/Flex-View Editor with OpenWebStart?I'm running Linux (Kubuntu 24.04) as Desktop OS and have installed current Version of OpenWebStart.I'm not able to start the MIB_Tools.- When I choose connect ...

PeterK · 07-19-2024

Hi @all,is it possible to forward accounting information, like usernames, group-names or profile-names from endsystems authenticating via PPSK, to a Firewall?I want to match firewall rules based on identities of endsystems.With 802.1X it is possible ...

PeterK · 04-03-2023

Hello,has someone tried to use LRM/MACsec Adapter on 5420M Switch or if this is supported? I can't find information in the guides.I need LRM on uplink of 5420M Switch. The switch on the other side of this LRM connections will be VSP4900-24XE.I know t...

PeterK · 01-19-2023

I'm using some custom device-views in XMC/XiQ-SE reflecting to flex-views. From github and also self created. eg. current port status or interface-errors.Is it possible to have a refresh button in such dedicated device-views? Normaly the data read on...

PeterK · 05-24-2023

the fabric does not transport the q-header. The vlan tag is removed on the fabric border/edge in case of the elan.What you need to choose on the fabric edge (tagged or untagged) depends on the config on the other side. In your case the cisco switch.O...

PeterK · 05-24-2023

The 7520 will replace the VSP7400 and X695 (identical HW). And they were mainly designed for datacenter usage. In datacenter enviroments normaly you don't need macsec. So a cheaper phyless chip hardware is enough. But from the ports and other feature...

PeterK · 10-31-2022

you can take a look at the EXOS Backup-Scripts.The Backup of a EXOS-Switch contains a script-based config file and the xml-based config file.I don't know how this is done, but maybe it's a help.

PeterK · 10-13-2022

You have "untagged-frames-discard" on the VSP.This could be the reason. Can you try to remove the command?First I thought to stp. But you have disabled on S-Series.Can you verify that flowcontrol is diabled on S8? Normaly flowcontrol could be respons...

PeterK · 10-13-2022

As Jave wrote,for a Link-Aggregation the speeds of all ports need to be the same. If you use LACP or static doesn't care also if it's only a mlt or smlt. You must have same speed.

Extreme Networks

User Statistics

User Activity

prevent EXOS from sending traps for netlogin sessions

MIB Tools with OpenWebStart

Forward PPSK Accounting Information to Firewall?

LRM/MACsec Adapter on 5420M Switch?

custom device-view / flex-view with refresh button?

Re: Flex-uni untagde port

Re: 7520-series GA time

Re: Config backup on Hirshmann/Belden switch

Re: High In Discards on L3 interface with S8

Re: SMLT with LACP not working (SFP and RJ45)