New Contributor II
since ‎09-07-2021

User Statistics

  • 30 Posts
  • 0 Solutions
  • 1 Kudos given
  • 1 Kudos received

User Activity

Ok guys, I have a new site with two X450G2's running system version and Advanced Edge License. I currently have a high speed WAN from our local ISP which is a private link back to our HQ. We obtained a cellular LTE device from another prov...
Hello. In Extreme Management Center (EMC formerly Netsight) version, in the devices section we have 18 various pieces of network gear from Cisco to Extreme listed. In the firmware section I have specified the latest Summit and onie 22.5.1....
We have two x690 stacks mlag together (each stack is a 48 port sfp+ and 48 port 10g copper). They run the core of our network and use VRRP between them. I’m considering upgrading to the new release that came out on May 30th. It’s been almost 60 da...
I have an X450G2 24 port test switch and I wanted to see if XMC (Netsight) could push the newer SummitX- firmware file to it. The firmware is loaded and I attempted to have this pushed to the switch. After about 8 minutes or so of no pr...
I was trying to experiment with the EXOS version of what we do on our Cisco switches which is mac-address based security tied to a port. Sometimes we will use the following cisco commands on a port for example: switchport port-security maximum 2 s...
Kudos from
Kudos given to