Extreme Networks

Kevin_Alexis_Ma · 12-09-2020

Hi:Currently I have an XMC in version 8.0.2.42 with EXOS switches of the X460-G2 model the vast majority. I am trying to configure TRAP RECEIVER through XMC but in some it does the configuration:But now that I have done the installation of new switch...

Kevin_Alexis_Ma · 09-29-2020

I have the problem that I have created a map and topology in the XMC but when creating manual links it does not load any menu where the ports are selected. I have also tried different web browsers.I have the XMC version 8.5

Kevin_Alexis_Ma · 04-08-2020

Hi there:I am trying to connect a switch to the IQ cloud, I have reviewed this following forum:https://extremeportal.force.com/ExtrArticleDetail?an=000079814As reviewed, there is a separate module for connecting to the cloud but in version 30.5 it is...

Kevin_Alexis_Ma · 01-28-2020

HI: I currently have an XMC in the version in 8.4.1.24 and a virtual purview in the same version installed in Hyper-V. I am also using x440-G2 switches with EXOS version 22.5. I have configured through the XMC that Application Telemetry flows are se...

Kevin_Alexis_Ma · 11-12-2019

Hello:I am currently conducting an operation laboratory for MLAG and VRRP, for which I have 3 x440-G2 switches all with firmware version 22.5.1.7 patch1-3. Having the following scheme: All links are formed through LACP L2, I have the inconvenience t...

Kevin_Alexis_Ma · 01-29-2020

If correct, during the diagnostic process no port works. You have an approximate time of 15 minutes for that switch model,

Kevin_Alexis_Ma · 01-29-2020

Hi: If you want to rule out hardware problems on the x430, there is a hardware diagnostic process in EXOS. This implies a cut of the network services. The command is: #run diagnostic extended To verify the entire diagnostic process, I recommend that ...

Kevin_Alexis_Ma · 01-28-2020

I attach some screenshots.

Kevin_Alexis_Ma · 11-14-2019

Perform the tests to deactivate the MLAG ports (3,4) but the role is followed in both switches, this problem occurs only when the ISC port between the CORE switches is deactivated.

Kevin_Alexis_Ma · 11-14-2019

Dear:I have decided to open a case with TAC for further review of the problem, for my laboratory I am considering that only the VRRP Master when with connections to other networks or is routing. Therefore, when I perform the test to deactivate the IS...

Extreme Networks

User Statistics

User Activity

Configuración TRAP SNMP through Extreme Management Center

Error loading link create menu in Oneview maps.

Exos connect Extreme Cloud IQ

Client or server flows are not displayed on the Extreme Analytics dashboard

MLAG y VRRP (Active/Backup) Error change role

Re: I've inherited a mess - Need help with Extreme Wireless issue(s)

Re: I've inherited a mess - Need help with Extreme Wireless issue(s)

Re: Client or server flows are not displayed on the Extreme Analytics dashboard

RE: MLAG y VRRP (Active/Backup) Error change role

RE: MLAG y VRRP (Active/Backup) Error change role