Extreme Networks

Hello community, I have set up an EAP-PEAP 802.1X SSID in bridge at EWC topology on a cluster of C5210 running 09.21.16.0013 (as we need to support a couple of 3600 series APs). I have seen a couple of changes in 9.21.17.0006 related to RADIUS but I...

Hello, I have configured two RADIUS servers for authentication (see attached picture). Despite the priority configuration and the Round-Robin setting (see other picture), it seems the controller send Accounting packets to both servers. ...

Hi all, On a C25 EWC (firmware 08.32.10.0003), in "VNS Configuration" -> "Global" -> "Authentication" -> "RADIUS Servers", I tried to configure two server entries with same IP and different ports for both Auth and Acct... and the interface just did...

Hello, Several vendors have started to provide the ability to create L2 tunnels over GRE (possibly over IPSec over UDP which can help secure the traffic and traverse NAT) for the user traffic, directly from the AP to the core network (not to the con...

Hello, The big "C" is offering a feature called "rssi-check" (called "RSSI Low Check threshold" in the GUI: http://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/command/reference/cr75/cr75_chapter_010...) on its controllers. This per-radio s...