Extreme Networks

Charlie_Altherr · 06-02-2014

The guest gets as far as the verification screen. There he sits forever, since no code is coming. The email and txt message that are supposed to be sent are now being rejected by our email server (Exchange). It appears that NetSight is now forcing...

Charlie_Altherr · 08-19-2015

I would do this with policy and NAC. This would assume you have both available. The policy would be a deny all or could be deny some, allow other. The NAC would have a time group and location group defined. The time group would be the off hours/d...

Charlie_Altherr · 05-14-2015

Hi Beth, What you are describing is usually caused by a mismatch in configuration between the two devices. Auto is a setting that must be used on both devices for it to work. This would be the preferred setting. You obviously know how to set it o...

Charlie_Altherr · 11-05-2014

I had a similar issue about a year ago. Root cause was time variation between NAC server and controller. Even though NTP was configured on the controller, time had drifted significantly. Manually setting the time on the controller resolved the imm...

Charlie_Altherr · 10-13-2014

Here is the information needed to create the Flexview I spoke of in my earlier post. From Console, click on the “Interface Statistics” tab in the large window. In the upper left corner of the large window, click on the small button....

Charlie_Altherr · 10-13-2014

On an S-Series switch, you can issue "set port trap disable" command. This will disable the link up/down trap for the ports listed. Like you, I only wanted to see link traps on uplink ports and access point links, not on every device or end point....

Extreme Networks

User Statistics

User Activity

After upgrade to Enterasys NetSight and NAC from 4.4 to 5.1, sponsorship guest portal stopped working

RE: Is it possible to limit or kill the output from AP's after hours?

RE: Extreme switch and Sonicwall Firewall

RE: EWC doesn't changes rule after guest registration

RE: Filter snmp link trap notification except on uplinks in Netsight

RE: Filter snmp link trap notification except on uplinks in Netsight