Extreme Networks

Robert_Fredette · 02-02-2022

Is it possible to alert from the XMC on either of these NAC conditions? If a specific rule is hit in the NAC rule list. For example send an email if the Default Catchall rule was used.If a specific error condition in the End System Events occurred. ...

Robert_Fredette · 03-09-2021

I just ran across this issue today. We are running XOS 30.2.0.29 and XMC 8.5.2.6.I moved a switch from one policy domain to another and tried to Enforce but got an error. The issue ended up being a case difference in VLAN names.On the switch, vlan ...

Robert_Fredette · 08-06-2019

The scenario: We are currently running 21.1.3.7-patch1-7 on our Summit x460-G2 endpoint switches. We use third party 10 Gb SM GBICs which currently are running using auto ON. After upgrading to 22.5.1.7-patch1-7 the port is disabled and there is a m...

Robert_Fredette · 06-13-2018

For many reasons we need to shut down the Spanning Tree on our pair of 7100 switches while we perform some other work on them and the connected systems. Today we are actively using spanning tree, the pair of 7100 switches are connected to an MLAG pai...

Robert_Fredette · 08-21-2017

I wanted to get opinions on setting up Policy domains for our environment. We have a very simple set of requirements which boil down to this: a set of policies for Edge Switches a different set of policies with very little duplication for Top of Ra...

Robert_Fredette

This issue is very similar to one we are experiencing on much older versions of the APs. In our case it causes the same symptoms on 3935 and 3825 APs. In our case it was not every client on the AP but usually a small subset (4 out of 25 for instanc...

Robert_Fredette · 08-21-2017

Uhh... well we are using Policy to block BPDUs at the ports on the core from the edge switches. That makes each edge switch grouping it's own STP domain. We can still run edgeport and loop protect on the edge switches but don't suffer the big STP d...

Robert_Fredette · 08-21-2017

Jeremy, Thank you! That makes sense. I forgot about the Global rules. We also don't use policy very much on the core, our current use is a VERY special thing that we are looking to replace with better spanning tree implementations soon. As for ou...

Extreme Networks

User Statistics

User Activity

Can an Alert be set up to trigger when a NAC rule is used?

Policy Bug? Case dependent vlan names

Auto Negotiation after Upgrade to 22.5.1.7-patch1-7

Disabling STP on a pair of 7100 switches

How many Policy Domains? One or many?

Re: Client DHCP Failure on AP410c

RE: How many Policy Domains? One or many?

RE: How many Policy Domains? One or many?