We have an RFS4000 Controller and we relocated one of the associated AP7522 AP’s. We were having a few connection problems so I rebooted the controller. Now, all 30 AP’s are showing as offline and they look as thought they have stopped communicating ...
We are having an issue with a couple of our SSID's that don't look like they are pulling DHCP addresses all of a sudden. They are running on the same VLAN, but one SSID gets VLAN and the other 2 don’t. The controller also acts as the Internet Gateway...
We have several VLAN's configured on the RFS-7220 Wireless Controller.
However, currently only VLAN 400 is able to get out to the Internet. When we assign any other VLAN to other profiles, the wireless clients get the correct local DHCP address, ...
We are using the RFS-4010 Controller running firmware version 5.9.2.3-003R. We have created a new SSID (Tappan) and it is not showing up for clients.
I have configured all of the settings in the Basic section:
and setup the security settings fo...
We have the RFS4000 FPGA Ver 2.8. We recently changed the Guest Network SSID and now clients can not get out to the Internet. We get assigned all of the correct IP credentials, but we can not go out to the Internet after the change.
DHCP is coming from the controller and defined by the VLAN configuration (see first picture).
The Controller is also doing the routing for the network.
I don't have a problem getting DHCP that works fine. The problem is when I assign any other VLAN...
