Hello @Macknkss,Please make sure that lldp is enabled on both the switch and APs for proper power negotiations. Here's an article on same for your perusal: https://extreme-networks.my.site.com/ExtrArticleDetail?an=000058855BR,
If the AP is in HiveOS mode then it will not be adopted by a WiNG controller and WiNGman will not work with it. You will need to revert it to WiNG OS and then adopt, upgrade and configure. https://extreme-networks.my.site.com/ExtrArticleDetail?an=000...
Hello @ISC-Admin,You said that the radios channel width should be 40Mhz but per the info you provided it looks like it's still 20Mhz. I would recommend the following:From within XIQ revert to Template defaults: https://extreme-networks.my.site.com/Ex...
Hello @OGB-NIKO,From WiNG Manager go to Configuration > Wireless > Select the WLAN > on bottom right of page click Replace > Enter new name > Click Replace (you should now see the new WLAN listed) > Edit and make whatever changes you'd like. Hope thi...
