Extreme Networks

Dan15 · 07-28-2021

Has anybody ever successfully onboarded XIQ SE through a proxy server? The welcome page allows to set proxy server, after a while it failes:Unable to communicate with ExtremeCloud IQ properly after onboarding. You may need to try again later after ve...

Dan15 · 01-08-2021

I see three options:Use the MAC to IP Mapping listFor us this is not maintainable and we don’t have a source with MACtoIP informations which would allow some automated imports. IP Discovery on Network Access SwitchI think Control uses the nodealias M...

Dan15 · 01-08-2021

I wonder what is your method to bring all end systems MAC addresses to XMC database? Do you just have EAP enabled on every port? I am asking because I want to have this data in XMC for visibility, but I also want to avoid having the NAC dependency in...

Dan15 · 08-12-2020

I have a column in a flexview that I’d like to display a color button depending on the value. I was able to make that working in the console but in Oneview it does display the column, but no color button or the value, only a dash string. I was lookin...

Dan15 · 01-22-2020

Hi all I’ve setup a small virtual LAB to play with the NAC. The LAB has VSPs as core and EXOS on the edge. I’d like to see the end-system feature, but I’m not getting any results. I’ have configured identity management on the EXOS, but still nothing...

Dan15 · 08-12-2021

I don’t know either what could be a scenario for “Status only poll” if the lowest poll time is 4 hours. Something we should ask Extreme Is there a limit about how many “Ping only” devices you can add?

Dan15 · 08-06-2021

What’s the reason you want to use the “Status only poll”? License?For your scenario you should use one of the three poll groups.

Dan15 · 05-07-2021

If it is a non-local-next-hop, you need to add a static ARP entry to make the route active: ================================================================================================== IP Static Route - GlobalRo...

Dan15 · 04-28-2021

Have you verified the upgrade path is correct?I would say in your case you would have to do:6.0.x->6.1.x->7.1.x->8.1.x->8.3.x

Dan15 · 04-26-2021

At OID 1.3.6.1.4.1.45.1.6.4.4.40 you can set the auth method for SSH to either none or local:iso.org.dod.internet.private.enterprises.synoptics.products.series5000.s5Agent.s5AgentSystem.s5AgSysTelnetSessionLoginAuthenType 1.3.6.1.4.1.45.1.6.4.4.40 s...

Extreme Networks

User Statistics

User Activity

XIQ-SE onboard through proxy

MAC to IP resolution approach for static addresses

End Systems MACs collection

Flexview color icon expression

End-Systems virtual EXOS

Re: Extreme Management Center - Status only interval

Re: Extreme Management Center - Status only interval

Re: VOSS Static Route Showing 'INACTV'

Re: VSP 7254 XSQ Software Upgrade fails

Re: ERS 4850 SNMP