Extreme Networks

Michael_Peel · 04-19-2016

Card 8900-G48X-xl failing with "Error External Table Tuning Failed(-51) from HAL on CardExec INIT(5)." I am running version 12.5.4.5 on the MSM (MSM-48C) so the card should be happy with it at least I believe that it should be. I have swapped out...

Michael_Peel · 02-24-2015

I have several of these units that have been sitting in our warehouse and they all seem to have an enable password setup on them that no one has any clue on what it could be. I have looked on line for a process to remove the enable password on these ...

Michael_Peel · 04-19-2016

Extended Diags on the MSM past with flying colors.

Michael_Peel · 04-19-2016

Replaced the RAM per my Boss telling me to try it since I was getting this error with it. The Original RAM is back in with no change. I did notice that while the card is loading if I show the slot the download % will cycle about 5 times from 50 - 100...

Michael_Peel · 04-19-2016

I know that the version that I have is really old but since the cards release notes say 12.4.1 (or later) Required. I would think that 12.5 would be enough to at least bring the card up. I will however go through the GTAC knowledge base to see if th...

Michael_Peel · 02-24-2015

Thank you for the fast reply. That did it.

Extreme Networks

User Statistics

User Activity

Error External Table Tuning Failed(-51) from HAL on CardExec INIT(5)

Enterasys RBT-8400 enable password reset help

RE: Error External Table Tuning Failed(-51) from HAL on CardExec INIT(5)

RE: Error External Table Tuning Failed(-51) from HAL on CardExec INIT(5)

RE: Error External Table Tuning Failed(-51) from HAL on CardExec INIT(5)

RE: Enterasys RBT-8400 enable password reset help