Extreme Networks

xiqa · 11-04-2024

I've added my XIQ-C instance to my XIQ-SE Instance and would like to create a rule where the condition check is the Site ID that is defined in XIQ-C. We have an SSID that is broadcasted to different sites, and depending on which site the request is c...

xiqa · 10-28-2024

We have an XIQ-SE and an XIQ-C instance and would like to mix some forms of dynamic VLAN assignment. Here's what we'd like to achieve: 1. The AP should be assigned it's management port in a VLAN untagged based on its MAC address. 2. The clients using...

xiqa · 09-20-2024

Hi allI have noticed that many links (most I'd say) point to documents that are not accessible on the original link anymore and I'm redirected to the extreme portal, where I can't find the original document, that was either referenced in a kb article...

xiqa · 09-17-2024

We have an XIQ-C with several WLANs that authenticates the users/machines on a Windows NPS Server. We'd like to migrate the RADIUS Server from the Windows NPS Server to our XIQ-SE. The AAA Groups on the XIQ-C are configured with a NAS ID, because tha...

xiqa · 11-13-2024

Hi Ryanthank you very much for your suggestion.So I've changed the Called Station ID to Site Name and in the control logs from XIQ-SE I see on the Port Info Raw field that it gets the information about the SSID and Site Name, and as you said there it...

xiqa · 11-05-2024

Hi Ryanthank you for your explanation. The thing is I'd like to also check the SSID name in my location group, so if I change the Called Station ID to Site Name, would I still be able to check for the SSID name that is called by the client? And the t...

xiqa · 11-01-2024

OK I made a dumb mistake. On the XIQ-C in the Auth Role I had the Default Action to deny. Now after setting it to allow it works. There was also no need to create a rule for the PSK network on XIQ-SE. I've only configured the role with the Access Con...

xiqa · 10-31-2024

Hi Jamesthank you for your reply. I still haven't figured out how to get it to work. These are the steps that I have applied: 1. Created a role with the AP aware function active and VLAN egress with the VLANs, that should be allowed implicitely: 2. V...

xiqa · 10-28-2024

Hi Ryanthank you for your reply. So just to get it right, I would create three roles for each VLAN variation and set the AP aware feature to enabled for each of the roles.Then I'd create the three rules, that check the different conditions (MAC, EAP-...

Extreme Networks

User Statistics

User Activity

Location condition check for XIQ-C integration

Dynamic VLAN Assignment with WPA2-PSK WLAN

Dead links

XIQ-SE how to check NAS Identifier in Rule

Re: Location condition check for XIQ-C integration

Re: Location condition check for XIQ-C integration

Re: Dynamic VLAN Assignment with WPA2-PSK WLAN

Re: Dynamic VLAN Assignment with WPA2-PSK WLAN

Re: Dynamic VLAN Assignment with WPA2-PSK WLAN