ExtremeSwitching (EXOS/Switch Engine) - Extreme Networks

ExtremeSwitching (EXOS/Switch Engine)

Questions and discussions about EXOS

Forum Posts

Sorted by:

Start a conversation

Facing Internet Connectivity issue in Extreme 4220 series.

Hi All,I have a network subnet with 4220 series switches internet working very well but suddenly I dont know from where I got a new dhcp server and I lost the Internet connectivity what type of security measures I should do to protect my switches fro...

4220 switches SNMP management

Hello!I have to configure LLDP-MED in a 4220 and the command is not allowed by the CLI:Enable lldp port allconfigure lldp port all advertise vendor-specific med capabilitiesconfigure lldp port all advertise vendor-specific med power-via-mdiconfigure ...

NPS and Extreme

Hello! I am trying to set up a service account that can read the config of our extreme and we authenticate it using NPS. I was wondering if anyone had any idea of how to do this? I tried messing with priv-level attributes but to no avail. I don't wan...

32.6.3.127 snmp compatibility

in older versions of EXOS we used the commands below to get our NMS working with interface stats. configure snmp compatibility get-bulk reply-too-big-action standardconfigure snmp compatibility ip-fragmentation allow these commands are no longer avai...

X590 40Gb to 4x 10Gb LC

I would like to use the X590 QSFP+ ports as 10 Gb uplinks to another brand gear that is a few meters away.Am I right that I need the 40G-SR4-QSFP150M module and Patch-Fiber 5M MPO-4xLC MMF (10332) cable? Are those four LCs duplex so eight LC connecto...

Top Kudoed Authors

User

Count

28

26

19

18

17

GTM-P2G8KFN