ExtremeSwitching (EXOS/Switch Engine)

Dear Christopher, Thank you very much for the reply. Using the "utilization" command shows me 0 packets received or 0 packets ...

Hi, "show ports 2:13 utilization" will show if that device is sending traffic. If it is not, then the switch will not learn ...

Dear Extreme, One of the ports on our X450G2 stack is showing up as enabled and active. However when we want to see the mac address ...

Hi Chris, The switch is unreachable (ssh, CloudIQ). We cannot ping it from another switch in the same VLAN, cannot ping its gateway. ...

RADIUS Remote Authentication Dial-In User Service is a client-server protocol and software that enables remote access servers ...