cancel
Showing results for 
Search instead for 
Did you mean: 

So looks like with 8.2r2 Aerohive is supporting the hostnames in the beacons.

So looks like with 8.2r2 Aerohive is supporting the hostnames in the beacons.

mali
New Contributor III

I noticed in HMOL NG that there is an option under Additional Settings --> Management Options and then "Hostname in Beacons". So I'm guessing will need to create a Management Option profile and turn this feature on as well as upgrade the AP's to 8.2r2 for this to work? I tried to use the help option but it doesn't say anything about it.

1 ACCEPTED SOLUTION

samantha_lynn
Esteemed Contributor III

Hello, yes you would need to turn the feature on and make sure your devices were on at least HiveOS 8.2r2. I will let our documentation team know that the help file is missing information on this feature, thank you for letting us know.

View solution in original post

3 REPLIES 3

mali
New Contributor III

Thank you, showing up in the packet capture so that is cool.

 

http://mali77.com/2018/05/23/aerohive-ap-hostnames-in-beacon-frames/

samantha_lynn
Esteemed Contributor III

Hello, yes you would need to turn the feature on and make sure your devices were on at least HiveOS 8.2r2. I will let our documentation team know that the help file is missing information on this feature, thank you for letting us know.

mali
New Contributor III

7590b8d9d0e2413f885d2e044086d4d8_0690c000006VEzXAAW.png

GTM-P2G8KFN