I am trying to run a TCL script on multiple ports on a Securestack switch, but when the script is run, the output is entering commas instead of semi-colons in between ports. Is there a way to change this behavior for TCL scripts run on SecureStack s...
Hello all. I’d like to push new SNMP settings to EXOS stacks (and optionally SecureStacks) from XMC. There’s a system-provided Python script, Configure SNMP Profile, that looks like it will just do that, but running it against an X440-G2 switch gives...
Hi, With EOS (think it might have just been on the S or K series) you was able to get a record on rule hit reporting / accounting by enabling 'Syslog' on either the Policy Role or Rule. Doing this and enforcing to an EXOS device doesn't seem to be ...
Have Telemetry Analytics configured on the core switches of the network on every port, so all traffic transitioning the network should be captured. When looking at the analytics ‘Application Flows’ I am not seeing any data for any IP address a phone ...
Hi, Have a simple question regarding the configuration of a NAC End-System group. Can you do anything to say achieve the below: 10.161.94.21-32/32 excluding 10.161.94.27-28/32 Without having to manually list each individual IP address Many thanks i...
